மர அறுவை ஆலை உபகரணங்களுக்கான பற்சக்கரங்கள்

மூலம் | ஏப்ரல் 3, 2026 | ஸ்ப்ராக்கெட்டுகள்

மர அறுவை ஆலை உபகரணங்களுக்கான பற்சக்கரங்கள்

Australian sawmill operations — from small portable mills in plantation forestry to large fixed softwood and hardwood processing plants — rely on roller chain drives at every stage of the log-to-lumber conversion process. Sawmill chain drive sprockets operate in some of the harshest industrial environments: heavy shock loads from log impact, embedded bark grit and sand, constant moisture from log washing and debarking, and the vibration of high-powered saw drives. View our forestry & sawmill sprocket range →

Sawmill log handling chain drive sprocket

கண்ணோட்டம்

A modern sawmill uses roller chain drives at multiple stages of the production process:

  • ✓Log in-feed conveyor: Heavy-duty ANSI #80 or #100 chain sprockets on the log infeed deck that conveys raw logs from the log yard to the debarker and headsaw.
  • ✓Log turner and positioner drives: ANSI #60 or #80 sprockets on log-turning mechanisms that rotate the log for optimal cutting orientation.
  • ✓Debarker chain drive: High-torque ANSI #80 or #100 chain drives powering the ring or drum debarker around the log.
  • ✓Edger and board-handling conveyors: ANSI #40 or #60 chain sprockets on board conveyor and edger feed systems, handling rough sawn lumber after the headsaw.
  • ✓Kiln stacker and sorter drives: ANSI #50 or #60 sprockets on automated stacking and sorting equipment that handles green lumber before kiln drying.
  • ✓Chip conveyor drives: ANSI #60 or #80 sprockets handling wood chips and bark from the debarker and chipper to the chip pile.

தொழில்நுட்ப விவரக்குறிப்புகள்

அளவுரு Sawmill Value வரம்பு
Chain Standard (log in-feed) ANSI #80 / #100 ANSI #60–#120
Chain Standard (board handling) ANSI #40 / #60 ANSI #35–#80
Chain Standard (chip conveyor) ANSI #60 / #80 ANSI #50–#100
Material (log in-feed) 40Cr கலப்பு எஃகு C45 for board-handling drives
பல் கடினத்தன்மை HRC 50–60 HRC 48–62
வழக்கு ஆழம் 1.5–3.0 mm —
Moisture & Bark Resistance Dacromet / zinc plate coated SS304 option for wash zones
மைய பாணி Type C for log in-feed Type B taper-bushed for board handling
துளை சகிப்புத்தன்மை H7 H6 on high-shock log drives
இழை Simplex (board handling) Duplex for log in-feed
Operating Environment Bark dust, moisture, embedded grit —
Lubrication Manual (external) / oil bath (enclosed) —
இயந்திர வேலை தரம் DIN தரம் 6 —
Deformation post-HT ≤0.05 mm —
Weight (ANSI #80 Z=17) ~3.8 kg 0.5–40 kg
பிட்ச் 25.4 mm (log in-feed) 12.7–38.1 mm
ஆவணப்படுத்தல் Batch cert on request —
Max Shaft Diameter Up to 120 mm Up to 180 mm custom
Operating Temperature −5°C to +60°C —

செயல்திறன் நன்மைகள்

🦔 Bark-Grit Abrasion Resistance Bark grit and embedded sand in freshly harvested logs act as grinding compound on sprocket teeth. HRC 50–60 induction-hardened C45 (log in-feed) and 40Cr alloy (debarker drive) resist this abrasive wear mechanism, delivering 2–3× the service life of un-hardened sprockets in sawmill environments.
💦 Moisture-Resistant Coating Dacromet (480+ hours salt spray) and zinc-plate coatings protect carbon-steel sprockets from the constant moisture of log washing and debarking operations. Dacromet is preferred for the log-handling wet zone; zinc plate is adequate for the drier board-handling area.
⚡ Log-Impact Shock Load Capacity Log in-feed chain drives receive severe shock loads when individual logs — some exceeding 1,000 kg — drop onto the infeed deck. 40Cr alloy steel with tough core (Charpy 40–60 J) absorbs these impact loads without tooth fracture, a common failure mode of standard C45 sprockets in log handling.
🔧 Taper-Bushed for Planned Maintenance Board-handling and sorter chain drive sprockets change frequently due to wear. QD taper-bushed versions allow sprocket replacement in under 20 minutes during planned maintenance windows, minimising production downtime in the typically continuous three-shift sawmill operation.

இணக்கத் தகவல்

Sawmill Position / Chain பரிந்துரைக்கப்பட்ட ஸ்ப்ராக்கெட் குறிப்புகள்
Log in-feed conveyor (ANSI #80 / #100) ANSI #80 or #100 40Cr alloy duplex Type C double hub; dacromet coated
Debarker chain drive (ANSI #80) ANSI #80 40Cr alloy sprocket High torque; moisture environment
Log turner drive (ANSI #60) ANSI #60 C45 hardened sprocket Shock load from log rotation
Board edger conveyor (ANSI #40 / #50) ANSI #40 or #50 finished bore Taper-bushed for quick changeover
Kiln stacker drive (ANSI #50) ANSI #50 precision sprocket Grade 6 for accurate stacking spacing
Chip conveyor (ANSI #60 / #80) ANSI #60 or #80 dacromet sprocket Wet chip dust environment
Linck, HewSaw, Comact sawmill lines (ref only) ANSI equivalent per chain measurement Brand reference only
Porter, Stenner, Lucas portable mills (ref only) ANSI #40–#60 replacement Confirm pitch and bore

Selection Guide

🦔Log-handling zoneLog in-feed, debarker, and turner drives: 40Cr alloy steel, HRC 52–60, Type C double hub, dacromet coating. These are the highest-load, highest-shock, and most moisture-exposed positions in the sawmill.
🔨Board-handling zoneEdger feed, sorter, and stacker conveyor drives: C45 induction-hardened, taper-bushed for maintenance access, zinc plate or dacromet coating. Lower shock loads but frequent wear — taper-bushed design speeds changeover.
🔊Chip & waste handlingChip conveyor, bark conveyor drives: C45 or 40Cr depending on load, dacromet coated for moisture/bark-acid environment. Long chain runs requiring idler sprockets for sag control.
📑Chain standard checkMeasure 10 links to confirm pitch: ANSI #80 = 25.4 mm; ANSI #60 = 19.05 mm; ANSI #40 = 12.7 mm. Verify roller diameter (ANSI vs ISO). Count teeth on worn sprocket. Measure shaft diameter for bore specification.

Installation for Sawmill Sprockets

  1. Isolate and lock out the sawmill drive according to the site LOTO procedure. In large integrated sawmills, LOTO may cover multiple interlocked drives.
  2. Remove bark and debris from the drive area before disassembly to prevent contamination of the new sprocket bore and shaft.
  3. Open chain using chain-break press. For ANSI #80 and above, do not attempt to break the chain with a hammer and drift — use a hydraulic press.
  4. Remove old sprocket. For log in-feed Type C double-hub sprockets, remove both hub retaining bolts before attempting to pull. Use a two-jaw or three-jaw puller rated for the load.
  5. ஷாஃப்ட் மற்றும் கீவேயை சுத்தம் செய்யவும். Remove embedded bark grit from the keyway with a file. Apply Loctite 638 to the bore/shaft interface (not thread-lock) for moisture-environment installations.
  6. புதிய ஸ்ப்ராக்கெட்டைப் பொருத்தவும். Torque retaining fasteners to specification; apply stainless or zinc-plated fasteners in moisture zones to prevent rust-seizing.
  7. Align sprockets using a straight-edge or laser tool — target ≤0.5 mm lateral offset.
  8. Install chain and tension. Sag 2% of centre distance on slack side. Check idler sprockets on long chip conveyor runs for correct tension.
  9. Run empty for 5 minutes before introducing logs or boards. Check for unusual noise or vibration.

Troubleshooting Sawmill Sprockets

அறிகுறி சாத்தியமான காரணம் பரிந்துரைக்கப்பட்ட நடவடிக்கை
Log in-feed tooth fracture C45 sprocket on high-shock log infeed Upgrade to 40Cr alloy steel; Type C double hub
Rapid wear in bark-dust environment Insufficient tooth hardness Upgrade to HRC 54–60; add lubrication
Corrosion pitting in debarker zone Insufficient surface protection for moisture Replace with dacromet; consider SS304
Board-sorter chain skipping Worn precision sprocket on sorter Replace with Grade 6 CNC-hobbed sprocket
Chain vibration on chip conveyor Long run without idler/tensioner Add bearing-mounted idler sprocket

ஆஸ்திரேலிய வாடிக்கையாளர் வழக்கு ஆய்வுகள்

Greg T. — Gippsland, VIC★★★★★Mill Manager, Softwood Sawmill
“We replaced all log in-feed drive sprockets with Ever-power 40Cr alloy ANSI #80 duplex units. The dacromet coating has resisted the constant moisture and bark acid from our debarking system for 20 months. Previously replacing every 8–10 months — this is a significant improvement. Very happy.”
April 2025
Mark B. — Tumut, NSW★★★★★Maintenance Manager, Pine Sawmill
“We use Ever-power for all our sawmill chain drive positions from log in-feed to board sorter. The taper-bushed variants on our board-handling conveyors have cut our monthly maintenance time significantly. Good quality products with reliable delivery.”
Fiona G. — Stanthorpe, QLD★★★★★Workshop Manager, Timber Processing Company
“We maintain three sawmill lines and purchase sprockets from Ever-power for all positions. The consistent quality and competitive volume pricing make them an excellent supplier for our maintenance programme. Technical support is also good when we need to identify a replacement specification.”
March 2025

அடிக்கடி கேட்கப்படும் கேள்விகள்

► What is the biggest cause of premature sprocket failure in sawmill log in-feed systems?
The two main causes are: (1) using standard C45 carbon steel instead of 40Cr alloy steel for log in-feed drives, which cannot withstand the combined shock load (log impact) and bark-grit abrasion; and (2) inadequate lubrication in a moisture/bark environment where the water film washes away lubricant faster than it can be replenished manually. The solution is: 40Cr alloy steel with deep case hardening + automatic chain lubrication.
► Should I use dacromet or zinc plate coating for sawmill sprockets?
Dacromet (480+ hours salt spray resistance) is strongly preferred for the log-handling wet zone (in-feed, debarker, chip conveyor) where continuous moisture exposure and bark-acid attack are present. Zinc plate (96 hours salt spray) is acceptable for the drier board-handling and sorter areas where moisture exposure is limited.
► What chain pitch is most common on Australian log in-feed conveyor systems?
ANSI #80 (25.4 mm, 1") duplex is the most common specification on medium-to-large sawmill log in-feed conveyors handling logs up to 1,000 mm diameter. ANSI #100 (31.75 mm) is used on large-log mills handling hardwood logs over 1,000 mm or very high-throughput softwood mills. ANSI #60 (19.05 mm) is common on smaller plantation softwood mills.
► How do I know if I need duplex (double-strand) chain and sprockets on my sawmill log conveyor?
Calculate the total pitch-line load: P (N) = (2 × drive torque) / pitch circle diameter. Compare to the single-strand chain working load (from ANSI B29.1 table). If the calculated load exceeds 70% of the single-strand working load, specify duplex (two-strand) chain and matching duplex sprockets. Our engineering team can perform this calculation from your motor rating and gearbox ratio.
► Can taper-bushed sprockets be used on the high-shock log in-feed drive?
We do not recommend taper-bushed (QD) sprockets for the primary log in-feed drive position due to the extreme shock loading from log impact. The taper bush can lose its grip under repeated high shock loads. Type C solid double-hub finished bore sprockets are required for the log in-feed. Taper-bushed variants are appropriate for the lower-shock board-handling and sorter positions where the maintenance-access benefit is greatest.
► What lubrication is required for sawmill chain drives?
For log in-feed and debarker chains (wet environment), an automatic oil lubricator with ISO VG 150–220 oil provides continuous protection. Manual lubrication every 2–4 hours is not adequate in wet sawmill conditions — the water film removes the lubricant rapidly. For board-handling conveyors (dry environment), manual brush lubrication every 4 hours is acceptable but an auto-lubricator is preferred for 3-shift operations.
► Do sawmill chain drives require any special consideration for fire safety?
Yes. Sawmill environments with dry wood dust present a fire risk from chain lubricant accumulation. Use a non-accumulating chain lubricant (thin-film type) rather than heavy-grease lubrication. Ensure chain guards direct any lubricant drip away from sawdust accumulation areas. Follow AS/NZS 4066 (fire detection and suppression) recommendations for sawmill drive areas.
► Can you supply sprockets for both hardwood and softwood sawmill applications?
Yes. The same sprocket range covers both hardwood and softwood applications — the critical variable is the log density and impact energy, not the wood species per se. Hardwood mills (denser logs, higher impact energy per log) should use 40Cr alloy steel for log in-feed and debarker positions. Softwood mills may be able to use C45 induction-hardened for lower-density log species.
► How do I order spare sprockets for sawmill planned maintenance?
For a planned maintenance stock programme, identify all chain drive positions in your sawmill, record chain pitch, tooth count, bore, and hub style for each position. Contact our sales team with this list and we will prepare a stocking recommendation, including recommended quantity of each critical position based on typical sawmill service intervals.
► What is the lead time for custom bore sawmill sprockets?
Standard ANSI #40–#100 sprockets with custom finished bore (to your shaft diameter specification): 5–10 working days. Custom bore 40Cr alloy steel heavy sprockets: 7–14 days. For non-standard tooth counts or very large diameters, lead time is 14–21 days. Contact our sales team with your urgency level and we will confirm the fastest available delivery.

தொடர்புடைய தயாரிப்புகள்: பரிமாற்றச் சங்கிலிகள்

ரோலர் டிரான்ஸ்மிஷன் சங்கிலி

⛓️ இணக்கமான பரிமாற்ற சங்கிலிகள்

நாங்கள் முழு அளவிலான தயாரிப்புகளை உற்பத்தி செய்து வழங்குகிறோம். ரோலர் டிரான்ஸ்மிஷன் சங்கிலிகள் ஒவ்வொரு ஸ்ப்ராக்கெட்டுடனும் இணைக்கப்பட்டுள்ளது — அனைத்து தொழில்துறை பயன்பாடுகளுக்குமான ANSI, ISO, டபுள்-பிட்ச், துருப்பிடிக்காத மற்றும் சிறப்பு நோக்கச் சங்கிலிகள்.

சங்கிலிகளைக் காண்க →

தரநிலைகள் மற்றும் சான்றிதழ்கள்

எவர்-பவர் ஆஸ்திரேலியாவின் அனைத்து ஸ்ப்ராக்கெட்டுகளும் பின்வரும் சர்வதேச தரநிலைகளுக்கு இணங்கத் தயாரிக்கப்படுகின்றன:

✓ ஐஎஸ்ஓ 9001:2015✓ ANSI B29.1✓ ஐஎஸ்ஓ 606✓ DIN 8187✓ JIS B 1801✓ பிஎஸ் தரநிலைகள்

தர உறுதிப்பாடு: ஒவ்வொரு உற்பத்திச் சுழற்சியிலும் 100% பரிமாண ஆய்வு, தொகுதி கடினத்தன்மை சோதனை மற்றும் முழுமையான தடமறிதல். மூலப்பொருள் சோதனைச் சான்றிதழ்கள் கோரிக்கையின் பேரில் வழங்கப்படும்.

எவர்-பவர் தொழிற்சாலை

எவர்-பவர் ஆஸ்திரேலியாவை ஏன் தேர்ந்தெடுக்க வேண்டும்?

நாங்கள் 25 ஆண்டுகளுக்கும் மேலான செயின் டிரைவ் நிபுணத்துவம் கொண்ட, ஒரு முழுமையாக ஒருங்கிணைக்கப்பட்ட ஸ்ப்ராக்கெட் உற்பத்தியாளர் ஆவோம். எங்களின் 35,000 சதுர மீட்டர் பரப்பளவுள்ள ஆலையானது, ISO, ANSI, JIS, DIN, BS மற்றும் GB தரநிலைகளின்படி, ISO 9001 சான்றிதழுடன், ஆண்டுக்கு 4 மில்லியனுக்கும் அதிகமான ஸ்ப்ராக்கெட்டுகளை உற்பத்தி செய்கிறது. எங்கள் உற்பத்தி →

ஐஎஸ்ஓ 90014 மில்லியனுக்கும் அதிகமான துண்டுகள்/ஆண்டுOEM திறன் கொண்டதுAU பங்கு

ஆர்டர் செய்யத் தயாரா அல்லது தொழில்நுட்ப ஆலோசனை தேவையா?

எங்கள் பொறியியல் குழு இலவசத் தேர்வு ஆதரவையும் விரைவான விலைப்புள்ளிகளையும் வழங்குகிறது. முக்கிய அளவுகள் ஆஸ்திரேலியாவில் கையிருப்பில் உள்ளன — வழக்கமான ஸ்ப்ராக்கெட்டுகள் அதே வாரத்தில் அனுப்பப்படும்.

📩 இலவச விலை மதிப்பீட்டைப் பெறுங்கள் 🔍 பொருட்களை உலாவுக