Zhengtai sprocket

Time: 2021-3-12 16:09:01 Source: Hebei Ever-Power Sprocket Factory

Zhengtai sprocket is commonly used in color, component, food foreign, demeanor, quantity and other component blocks, etc.
Zhengtai sprocket facility construction
The tooth profile of the positive sprocket The tooth profile of the positive sprocket only takes care of the saving of the chain and the firm and brisk mixing of the throwing surface, which can hold the chain link and contact stress when the surface is lowered, and it must be simply external.
The basic tooth profile of the end face of the sprocket.It is composed of three arcs aa, ab, cd and three special bc identities, simplifying the three arcs-special tooth profile.The tooth profile is fast and externally based on the accident map of the sprocket. You need to bookmark the "tooth profile specially made according to the 3RGB1244-85 standard" on the map, but the axial tooth profile of the sprocket should be guaranteed. , Please refer to the relevant construction manual for its life.
. Zhengtai Sprocket Facilities
Sprockets that are small enough to become the main body type are popular, while those that are not medium enough to produce a spoke type. In order to facilitate handling, installation and weight reduction, outside the spokes, the sprocket is large enough to cause the butt type, and the scope is now the ring gear. And the wheel core should use the appropriate application application application application application application application application application use application can be specially made with different content, stainless steel and other content.
. Zhengtai sprocket content
The content of the Zhengtai sprocket should take care of a little bit of special manufacture and wearability of the teeth, so the trend of the tooth surface of the Zhengtai sprocket is considered to be hot, so that it can be removed.
Zhengtai sprocket conversion maintenance
, The realization degree of the sprocket should be suitable. Too tight will save energy, the bearing is easy to understand the reducer of the elevator; if the sprocket is too loose, it is easy to understand the span and disconnection of the chain.The low degree of realization of the sprocket is as follows: from the commercial level of the sprocket, the principle distance of the two sprocket is reduced by 2%-3%.
, The sprocket guarantees that the shaft should not swing or be straight.In the same block machine, the end faces of some regular sprockets should be in the same lowering. When the principle distance of the regular sprockets is 0.5 meters later, connect as effectively as possible; the principle distance of the regular sprockets is 5 meters. The previous methods When connecting as efficiently as possible.However, it is not possible to achieve performance with relative positive sprocket teeth as much as possible, because of this, the deviation of the two wheels can be easily understood to form a chain off and slow down the elevator reducer.The only way to observe and analyze the offset is the sprocket when you wire the sprocket.

Previous: Jiangsu Wuxi Sprocket Manufacturers

Next: Sprocket processing flow