PRODUCT
- mailbox:[email protected]
Industry information
Jiangsu Wuxi Sprocket Manufacturers
The sprocket manufacturer in Wuxi, Jiangsu is made by electrolytic board. In the development of the current, the dye is similar to the paint, so that the connection is the same as the people. Because of this, it is also known as the sprocket manufacturer in Jiangsu Wuxi.It is impossible to count literally that the sprocket manufacturer means that there are foreign doors, but with a convenient tree pole inside, it is a kind of use that is sought after by everyone.
Jiangsu Wuxi sprocket manufacturer denies
, The sprocket manufacturers of counterfeit goods are mixing time copper powder in the crude public lottery, watching the static electricity, weaken the singing force with the so-called material, so that it will be changed if it is changed. Because of this, the sense of wire is changed, and the dye is not Meet the requirements.The real sprocket manufacturers use the anti-purple management pressure, high resistance to thick paint to blend the required price of copper powder to see the current, the sense of transformation is strong and the dye meets the requirements.
, Look at the lines.Fake sprocket manufacturers rely on bright red grid wire current, while real sprocket manufacturers rely on exporting black stranded wire, depending on the atomization current, it is self-evident that the selected material is good or bad.
Jiangsu Wuxi sprocket manufacturer removes the plate
In the area of sprocket manufacturers in Wuxi, Jiangsu, the copper plates of sprocket manufacturers are imitation brass and red copper.
Take copper as an anti-brass as a guide. The pre-response details are as follows: firstly, rust-removing, secondly, anti-rust paint, and then apply the brass gold powder paint for a while, and dry the previous short-brown brown brush. Dip the tip of the brush with a trace of bright red matte paint and take it on the special brush to create a piece of brush here, and also to create the rules.Such a boring method is the imitation copper style of the embossed door, and then try to do all of these paints.
The country’s dividing door is painted according to the pickling and phosphating method before the gate body is healed by the tree stem of the dividing door. The gate body is mostly short and large electroplated by hot-rolled tubes, hot-rolled plates, forgings and cold plates. It's not good to build current.Because of this, the initial oil removal and rust removal were also set at the juncture of the copper method. If the alkali resistance is removed well, the second installment in three years will easily fall off the powder and paint, which will interfere with the pomp of the sprocket manufacturer.
Maintenance of sprocket manufacturer in Wuxi, Jiangsu
Because of the sprocket manufacturer's own material, its maintenance is very important. If the paint developed by it falls off, the electrolytic plate inside will be exposed, and the electrolytic plate will oxidize once it comes in contact with oxygen in the air. , Causing the electrolytic plate to rust and interfere with the pomp of the door.A very important aspect of maintaining the door is to maintain the special integrity of the outside to prevent bumps and impacts.
Previous: Sprocket tensioning mechanism
Next: Zhengtai sprocket