PRODUCT
- mailbox:[email protected]
Industry information
Hatch sprockets
The hatch cover sprocket is usually used in the circulation of professional products such as chemical industry, grade products, poor food, appearance and food, transportation plants, etc.
Set up in the hatch sprocket
The tooth profile of the hatch cover sprocket only ensures that the inside of the chain is strong and convenient to pour into the machine and consumes the machine, which can increase the collision and the stress of the chain link during the machine tool. The plug should be easy to understand.
The tooth profile of the end face of the hatch sprocket is often adopted.This is composed of three arcs aa, ab, cd and five straight bc factors, and the floor heating three arcs-straight tooth shape.The tooth profile can’t be combined with the navigation combination. It is not necessary to draw the end tooth profile on the hatch cover sprocket event diagram. You need to indicate "The tooth profile is also named according to the 3RGB1244-85 system" on the diagram. Draw the tooth profile of the shaft surface of the hatch cover sprocket, and refer to the irrelevant manual for its dimensions.
. In the hatch sprocket
Small anti-corrosion hatch cover sprocket may be severe in general, and medium anti-corrosion hatch sprocket may be spoke plate type, so that it can be transported, installed and lowered. Cables on the spoke plate, large anti-corrosion hatch cover sprocket may be possible Combined type, the current ring gear and wheel core can be used with different materials, aka!, no other materials are configured.
. Hatch cover sprocket material
The raw materials of the hatch cover sprocket should ensure that the teeth have a small amount of regularity and stability. Therefore, the tooth surface of the hatch cover sprocket is generally considered to be hot and dry, so that it is best to clean it.
Hatch cover sprocket keeps wiring
, The speed of the hatch cover sprocket should be universal, too tight will make up for the power consumption, the bearing is easy to understand, straight profile toroidal worm gear reducer; too loose hatch cover sprocket is easy to understand Liaocheng sprocket factory and convenient .Regards of the hatch cover sprocket: from the second part of the hatch cover sprocket economy or depress, lower the two hatch cover sprocket 2%-3% of the original intention.
, The life axis of the hatch cover sprocket should swing and be completely vertical.In the same circulating machinery, the end faces of the two hatch cover sprockets should be located on the same official website. When the original intention distance of the hatch cover sprocket is less than 0.5 meters, the main fault is the main fault; the original intention distance of the hatch cover sprocket is. 5 meters in the spring of the first few methods, the main fault is the main fault.But do not try to have the side part of the sprocket of the meeting hatch cover, assuming that the offset of the two wheels is too large and easy to understand to produce a straight-profile toroidal worm gear reducer that is convenient and accelerates.When changing the hatch cover sprocket, only pay attention to check and adjust the offset hatch cover sprocket.
Previous: Standard sprocket parameters