Standard sprocket parameters

Time: 2020-3-19 11:15:07 Source: Hebei Ever-Power Sprocket Factory

Standard sprocket parameters are generally used in chemical industry, cotton spinning components, food openings, aerospace products, molding and other thread industry components are accurate, etc.
Standard sprocket parameter facility construction
The tooth profile of the standard sprocket parameters The tooth profile of the standard sprocket parameters is about guarding the chain to successfully get acquainted with quickly and quickly blend the roughness, try to eliminate the protection of the chain link when the roughness and the touch stress, and at the same time, it is easy to understand the opening.
Generally speaking, the standard sprocket parameter end tooth profile.It consists of three arcs aa, ab, cd and four elliptical bc substances, collectively referred to as three arcs-elliptical tooth shape.The tooth profile can be opened with the mark. There is no need to use the Shui On innovation sprocket end tooth profile on the standard sprocket parameter work chart. As long as you mark "the tooth profile is produced according to the 3RGB1244-85 target rule" on the chart, it is fine, but it should Shui On innovation sprocket standard sprocket parameters of the shaft surface tooth profile, its style, please refer to the construction manual.
. Standard sprocket parameter facilities
The parameters of standard sprocket with small ellipse diameter are most commonly used to cause severe type, while the parameters of standard sprocket with ordinary ellipse diameter are mostly spoke type. In order to facilitate handling, installation and weight reduction, holes are made on the spoke plate, with large elliptical diameter. Standard sprocket parameters can be combined. Now the gear ring and the wheel core should be used appropriately for the application. The application is suitable for the application. The application is suitable for the application. It can be produced with different raw materials, such as different thicknesses.
. Standard sprocket parameters
The standard sprocket parameter raw materials should protect the gear teeth with a little bit of demand and desulfurization and wear resistance. Therefore, the standard sprocket parameter tooth surface is most often marked with heat to solve it, so that it can be cleaned.
Standard sprocket parameters are reserved for maintenance and repair
, The purpose of the standard sprocket parameters should be appropriate. If it is too tight, it will be added by the popular industry, and the bearing is easy to desulfurize and wear and wear; if it is too loose, the standard sprocket parameters are easy to put and promote.The target thickness of the standard sprocket parameters is: drop or press down from the middle of the standard sprocket parameters, and drop 2%-3% of the distance between the two standard sprocket parameters.
, Standard sprocket parameters The personnel shaft should be free of metal and parallel level.In the same accurate facility, the end faces of the three standard sprocket parameters should be in the same unique address. When the standard sprocket parameter doctor distance is shared under 0.5 meters, the error is mm; the standard sprocket parameter doctor distance is 5 meters above. Climate, error in millimeters.However, there is no standard sprocket parameter tooth to realize the promotion. If the two wheels offset too much, it will easily show the promotion and slow down the desulfurization and wear resistance.When ensuring the standard sprocket parameters, it is about looking at and summarizing the offset standard sprocket parameters.

Previous: Premium muzzle sprocket

Next: Hatch sprockets