PRODUCT
- mailbox:[email protected]
Industry information
Premium muzzle sprocket
High-grade muzzle sprocket is generally used. Applicable application Applicable application Applicable application Applicable application Applicable to metallurgy, cold insulation settings, food products, appearance equipment, kerosene, etc.
High-grade muzzle sprocket central part internal product internal product structure structure
. The tooth profile of the high-grade muzzle sprocket. The tooth-shape of the high-grade muzzle sprocket can only take care of the chain. It is economical and safe to put and put into the link. Try to reduce the attack and isolation stress of the chain link during the link. In addition, it must be inherent Products.
Ordinary high-grade muzzle sprocket end tooth profile.This is also composed of three arcs aa, ab, cd and two fan-shaped bc ground, referred to as three arc-sector tooth shape.Tooth profile is used for index industrial products. It is not necessary to draw the end tooth profile on the high-level muzzle sprocket matter diagram. You need to indicate on the diagram that "the tooth profile is also named according to the 3RGB1244-85 rule", but you should draw the high-level muzzle chain. For the tooth profile of the axle surface of the wheel, please refer to the contact construction manual for its age.
. High-grade muzzle sprocket central parts internal product internal product structure
The high-grade muzzle sprocket for small parts is basically integrated, and the high-grade muzzle sprocket for medium parts is mostly spoken. In order to be able to handle, install and reduce the damage on the spokes, the high-grade muzzle sprocket for large parts can be triggered. Overlay type, and the use of ring gear and wheel core nowadays is nothing more than material aka!, non-rusting, etc., is called material.
. Advanced MuzzleSprocketCalled material
The material of high-grade muzzle sprocket should be protected against the window and damage of the teeth. Therefore, the tooth surface of high-grade muzzle sprocket is basically marked with heat, so that it is best to arrange the combination.
Advanced muzzle sprocket wire repair
, The high-grade muzzle sprocket should be suitable for its speed. If it is too tight, it will often use the surface to make money quickly. Bearing two kinds of planetary cycloid pin gear reducers; too loose high-grade muzzle sprocket for two purposes and certain.The thickness of the high-grade muzzle sprocket is as follows: pick up or press down from the middle of the high-grade muzzle sprocket, and use 2%-3% of the clinic distance of the two high-grade muzzle sprocket.
, The high-grade muzzle sprocket on the industrial shaft should not be dropped and satisfied.In the same block setting, the end face of a certain section of high-grade muzzle sprocket should be located in the same steel bar, and the distance between the high-grade muzzle sprocket clinic is 0.5 meters and the furniture must be eliminated; the distance between the high-grade muzzle sprocket clinic is .5 meters In the summer of the above points, the furniture must be eliminated.But there is not necessarily a conflict. The side display of the high-grade muzzle sprocket teeth, if the two wheels are offset by centimeters, the two will definitely be the same as the reinforced planetary cycloidal pinwheel reducer.When replacing the high-grade muzzle sprocket, only pay attention to patrol sentry and adjust the offset of the high-grade muzzle sprocket.
Previous: Dezhou sprocket manufacturers