Pyramid sprocket material

Time: 2020-3-7 16:57:16 Source: Hebei Ever-Power Sprocket Factory

Pyramid sprocket is usually suitable for special anti-corrosion small sprocket, such as chemical industry, isolation and anticorrosion, food quality, side products, difficult, etc.
Pyramid sprocket tree pole internal configuration
The tooth shape of the pyramid sprocket only has the resistance of the protection chain. It can enter and exit the link smoothly and lightly. Carefully reduce the assault protection impact and touch stress of the chain link during the link. It is galvanized and high-efficiency quality.
The basic tooth profile of the pyramid sprocket.It is organized by three circular arcs aa, ab, cd and a certain circular bc, collectively called three circular arcs-circular tooth shape.The tooth profile needs quality according to the standard, and the end tooth profile needs to be drawn on the pyramid sprocket service drawing. You only need to write the original "tooth profile according to 3RGB1244-85 to indicate the formula" on the drawing, but you should draw the axial tooth profile of the pyramid sprocket. Please refer to the relevant configuration manual for the time.
. Inside the Pyramid Sprocket Tree Pole
Small curve pyramid sprocket almost leads to dangerous type, medium curve pyramid sprocket mostly leads to spoke type, in order to be able to carry, install and reduce weight, equipment on the spoke plate, large curve pyramid sprocket can cause mesh pattern, at this time the teeth The rim and the wheel core can be formulated with different materials, not exquisite and other materials.
. PyramidSprocketIngredients
Pyramid sprocket material should protect the gear teeth with proper amount of demand and wear resistance, so the tooth surface of the pyramid sprocket is almost all heated to make it as dense as possible.
Pyramid sprocket maintenance
, The tightness of the pyramid sprocket should be appropriate, too tight will determine the energy input, the bearing will run efficiently; too loose the pyramid sprocket high-efficiency bearing and small sprocket 6.The height, thickness, width and height of the elastic business circle of the pyramid sprocket is as follows: lifted or pressed down from the interlayer of the pyramid sprocket, about 2%-3% of the ideological distance between the two pyramid sprocket.
, The safety shaft of the pyramid sprocket should have a wooden bridge and a level.In the unified small sprocket 6 facility, the end faces of the two pyramid sprockets should be installed in a unified installation. When the ideological distance of the pyramid sprocket is 0.5 meters, the thickness must be accurate; the month when the ideological distance of the pyramid sprocket is more than .5 meters, Definitely accurate thickness.But it is not certain that there are several indications of the teeth of the pyramid sprocket. It is assumed that so if the two wheels are offset too much, the small sprocket 6 is produced efficiently and slows down.The only way to maintain the pyramid sprocket is to fix the guard and correct the offset pyramid sprocket.

Previous: Hebei Renqiu sprocket

Next: Toothed sprocket paint