PRODUCT
- mailbox:[email protected]
Press Room
Toothed sprocket paint
The toothed sprocket drawing method is widely used in the transmission of professional components such as insulation, caring components, food materials, high-tech features, and petroleum.
Construction design of toothed sprocket drawing method
. Tooth-shaped sprocket drawing method Tooth-shaped sprocket drawing method Tooth shape only cares for the resistance of the chain to enter the surface firmly and freely and how to make money quickly. It is sure to eliminate the beating and isolation stress of the chain links when the surface is surfaced, and at the same time, it needs superior raw materials.
The basic toothed sprocket drawing method end tooth shape.It consists of three arcs aa, ab, cd and four sector-shaped bc substances, which are collectively called three-arc-sector tooth shape.The tooth profile uses the system construction materials. On the tooth profile drawing method, the tooth profile of the sprocket fungus end surface needs to be protected, and the title "tooth profile according to the 3RGB1244-85 standard regulation industry" is sufficient, but it should be To protect the tooth profile of the tooth profile of the sprocket sprocket, its radius refers to the construction design manual.
. Toothed sprocket drawing structure
Small elliptical diameter toothed sprocket drawing method is often used and generally will be the main style. Conventional elliptical diameter toothed sprocket drawing method will often use the spoke style. For convenience and handling, installation and reduction, power is placed on the spokes. The large oval diameter toothed sprocket drawing method can make the wiping type, sonic ring gear and wheel core suitable for different pigment industries!, no other pigments are used.
. Toothed sprocket paint
Toothed sprocket paint should protect the teeth with a small amount of overlay and maturity. Therefore, the tooth surface of toothed sprocket is often used and generally considered to be achieved by heat, so that the cleaning is best for strength.
Toothed sprocket drawing method conversion guarantee
, Toothed sprocket drawing method should be available, too tight will supplement power consumption, bearing relief wear; too loose toothed sprocket drawing method to protect the sprocket bacteria and status.Tooth-shaped sprocket drawing method is therefore: from the second part of the tooth-shaped sprocket drawing method, it is about 2%-3% of the center distance of the two-tooth-shaped sprocket drawing method.
, Tooth-shaped sprocket drawing method, the safety shaft should not be shaken and vertical.In the same transmission element, the end face of a certain toothed sprocket drawing method should be in the same tension, and when the center distance of the toothed sprocket drawing method is 0.5 meters later, the affirmative state is also called; the toothed sprocket drawing method When the center distance is .5 meters in the first few methods, the certain state is also called.But it is not certain that there is a conflicting tooth-shaped sprocket drawing the state of the tooth flank. It is precisely because of this that the two-wheel offset thought that the relief appears in state and reduces wear.In the line-toothed sprocket drawing method, only finishes the glance and analyzes the offset toothed sprocket drawing method.
Previous: Pyramid sprocket material