PRODUCT
- mailbox:[email protected]
Press Room
Hebei Renqiu sprocket
Hebei Renqiu sprocket is widely used for non-magnetic, fast setting, finished products, appearance props, difficult and other door family settings daily, etc.
Hebei Renqiu sprocket internal conquest
. Hebei Renqiu sprocket tooth profile Hebei Renqiu sprocket tooth profile only the protection chain successfully participates and withdraws from the connection firmly and freely. Be careful of the collision and kick stress of the chain link when the connection is raised, and the plug should be easy to understand the finished product.
The general tooth profile of the end face of the sprocket in Renqiu, Hebei is often used.The dark field microscope is composed of three arcs aa, ab, cd and two or three ellipses bc, using three arcs-ellipse tooth shapes.The tooth profile is easy to understand and the finished product is easy to understand. It is not necessary to protect the end tooth profile on the Hebei Renqiu sprocket event map. You need to bookmark the "Tooth profile made according to the 3RGB1244-85 index" on the map. For the tooth profile of the shaft surface of the sprocket, please refer to the manual of implicated warfare for its style.
. Hebei Renqiu sprocket
Small diameter Hebei Renqiu sprocket generally produces a serious type, and the general diameter Hebei Renqiu sprocket produces a trigger-spoke type, which can be transported, loaded and lowered. It is outside on the spoke plate, and the large diameter Hebei Renqiu sprocket It can produce an initiating anti-cracking type, and now the gear ring and the wheel core are differently called material production! Non-automatic, etc., called material.
. Hebei Renqiu sprocket is called material
Renqiu, HebeiSprocketIt is said that the material should protect the teeth with a slight combination and abrasion. Therefore, the tooth surface of the sprocket in Renqiu, Hebei is generally achieved by the principle of heat, so that it can achieve a careful development of hardness.
Maintenance of sprocket in Renqiu, Hebei
, Hebei Renqiu sprocket should be used in combination, too tight will consume technical power, the bearing is easy to understand the reducer; too loose Hebei Renqiu sprocket is easy to understand and eliminate the arc cylindrical worm gear reducer.The resulting degree of Hebei Renqiu sprocket is as follows: from the quick power or pressure of the Hebei Renqiu sprocket, the cost is 2%-3% of the center distance of the two Hebei Renqiu sprocket.
, There should be no vibration and satisfaction on the shaft of the sprocket building in Renqiu, Hebei.In the same daily influence, the end faces of two Hebei Renqiu sprockets should be located in the same tensioned area. When the center distance of the Hebei Renqiu sprockets is 0.5 meters, the millimeters should be eliminated as much as possible; Hebei Renqiu sprockets When the center distance is above .5 meters, eliminate millimeters as much as possible.However, it is not possible to encounter the phenomenon of the side of the sprocket tooth in Renqiu, Hebei. Assuming that the two wheels are offset, the previous methods are easy to understand and eliminate the breeding and increase the reducer.When replacing the sprocket in Renqiu, Hebei, he only had to understand the patrol and sum up the offset of Renqiu, Hebei.
Previous: Henan sprocket manufacturers