Taper Bore ANSI #41 Sprocket

Taper Bore ANSI #41 Sprocket

Cái Taper Bore ANSI #41 sprocket features a tapered hub bore for rapid, tool-minimal installation and removal — the go-to solution for drives requiring frequent maintenance or seasonal changeovers. Available in single and hardened-teeth variants to ANSI B29.1, it prevents shaft damage during removal and dramatically reduces sprocket-change downtime in Australian agricultural, conveyor, and processing applications.

Mã sản phẩm: faae63c8b363 Loại: , , Nhãn: , ,

Sự miêu tả

Taper Bore ANSI #41 Sprocket

Technical Specifications — Taper Bore ANSI #41 Sprocket

Tham số Giá trị Ghi chú
Chain Number #41 ANSI B29.1
Sân bóng đá 1/2″ (12.700 mm)
Type Single Taper-Bushed With Hardened Teeth option
Bushing Size 1008 / 1210 / 1610 / 2012 (depending on tooth count)
Kiểu trung tâm Type B Single hub with taper bore
Max Bore Determined by bushing size
Vật liệu C45 Carbon Steel
Độ cứng của răng HRC 50–60 Induction-hardened option
Tiêu chuẩn ANSI B29.1

Key Features & Advantages

⚡ Rapid Installation & Removal Taper bore design allows sprocket installation in minutes without heating or pressing — ideal for scheduled maintenance windows and seasonal changeovers on agricultural equipment.
️ Shaft Protection Unlike interference-fit designs, the taper system releases cleanly without risk of shaft damage, scoring, or keyway deformation during removal.
Hardened Tooth Option Available with induction-hardened teeth (HRC 50–60) for demanding applications where rapid bushing removal must coexist with maximum tooth durability.
Standard Bush Compatibility Accepts industry-standard 1008, 1210, 1610, and 2012 taper bushes — universally available in Australia from multiple suppliers.

Compatibility & Selection

The taper bore ANSI #41 sprocket requires a matching taper bush (1008, 1210, 1610, or 2012 — depending on tooth count and bore diameter). The bore range is determined by the bushing selected. Selection rule: choose the bushing size that accommodates your shaft diameter within the listed bore range, then select the sprocket tooth count for your drive ratio. Contact our engineers for a free selection recommendation.

Ứng dụng

Máy móc nông nghiệp

Máy móc nông nghiệp
Seasonal drives on harvesters, combines, and planters requiring annual sprocket changeover
Conveyor Systems

Conveyor Systems
Drives where sprockets must be changed for product or format changeovers
Thiết bị xây dựng

Thiết bị xây dựng
Auxiliary drives on equipment requiring regular on-site maintenance
Food & Packaging

Food & Packaging
HACCP-compliant drives where rapid removal is required for line sanitation

Đánh giá của khách hàng

Craig D.  ★★★★★
Australia · April 2025
“Fitted taper-bore #41 sprockets to our harvester drives — changeover time dropped from 3 hours to 40 minutes per sprocket. Game changer for harvest season.”
Taper Bore #41 Z=21
François M.  ★★★★★
France · February 2025
“Clean taper bore, excellent surface finish. The taper is correctly ground — bushes seat perfectly without rocking.”
Taper Bore #41 Z=18 Hardened
Kevin L.  ★★★★☆
New Zealand · January 2025
“Good quality and fast delivery. Taper fit is solid with no play. Would give 5 stars if lead time on non-stock sizes was shorter.”
Taper Bore #41 Z=25
Priya S.  ★★★★★
India · March 2025
“We specified these for our packaging line refurbishment — perfect bushing seat, no fretting after 6 months of continuous operation.”
Taper Bore #41 Z=19

Câu hỏi thường gặp

►  Do I need to order the taper bush separately?
Yes. The sprocket and taper bush are supplied separately. Specify your shaft diameter and we will recommend the correct bush size and part number.
►  Is the taper bore #41 sprocket backward-compatible with a standard bore #41 sprocket?
The tooth profile and drive ratio are identical. You can replace a plain-bore sprocket with a taper-bore version on the same shaft — you will need to machine or purchase the appropriate bushing.
►  What is the removal procedure for the taper bush?
Thread the jack bolts into the release holes on the bushing flange and tighten evenly — the taper releases cleanly without any hammering or heat. This protects both the shaft and the sprocket bore.
►  Can I get these in stainless steel with a taper bore?
Yes, for ISO-series taper bore stainless sprockets. ANSI stainless taper bore is available as a custom order — contact us for lead time and pricing.
►  Are hardened-tooth versions available in all sizes?
Hardened-tooth taper bore versions are available for the major ANSI sizes. Confirm availability for specific tooth counts with our sales team.
  1. Insert taper bush into the sprocket hub — bush and bore must both be clean and dry.
  2. Slide the assembly onto the shaft to the required position.
  3. Hand-tighten the hub bolts evenly in sequence, progressively drawing the taper into the hub bore.
  4. Apply final torque to bush bolts as specified on the bush body (typically 5–30 Nm depending on bush size).
  5. Align with driven sprocket; install chain; set tension to 2–3% slack-side sag.
✓ ISO 9001:2015✓ ANSI B29.1✓ ISO/DIN 8187✓ Tiêu chuẩn JIS B 1801✓ Tiêu chuẩn BS/DIN✓ Tiêu chuẩn GB
Nhà máy Ever-power

Tại sao nên chọn Everpower Australia?

Chúng tôi là nhà sản xuất tích hợp theo chiều dọc với hơn 25 năm kinh nghiệm trong lĩnh vực truyền động xích. Nhà máy của chúng tôi rộng 35.000 m² và sản xuất hơn 4 triệu bánh răng mỗi năm. Chúng tôi cung cấp cho các đối tác OEM, nhà phân phối và người mua công nghiệp trực tiếp trên khắp nước Úc, với các sản phẩm đáp ứng các tiêu chuẩn GB, ISO, ANSI, JIS, DIN và BS.

Đạt chứng nhận ISO 9001
Hơn 4 triệu chiếc/năm
Có khả năng OEM
Hàng có sẵn tại Úc

Sẵn sàng đặt hàng? Nhận báo giá miễn phí ngay hôm nay!

Đội ngũ kỹ sư của chúng tôi luôn sẵn sàng 24/7 để hỗ trợ các doanh nghiệp Úc về thông số kỹ thuật, thiết kế tùy chỉnh và giá bán sỉ.

📩 Yêu cầu báo giá
 
🔍 Xem tất cả sản phẩm

Sản phẩm liên quan