Sprocket untuk Peralatan Pemindahan Tanah

oleh | 3 Apr 2026 | Sproket

Sprocket untuk Peralatan Pemindahan Tanah

Excavators, bulldozers, motor graders, scrapers, and compactors all rely on auxiliary roller chain drives to power accessory systems including hydraulic pump drives, cab air-conditioning compressor drives, engine cooling fan drives, and work-implement secondary drives. These earthmoving equipment chain drive sprockets must withstand extreme vibration, contamination from clay and rock dust, high ambient temperatures, and the shock loads of heavy construction operation. Browse our construction & mining sprocket range →

Earthmoving equipment auxiliary chain drive sprocket

Gambaran Keseluruhan

Modern large earthmoving machines (100–700 tonne class) use roller chain drives in several critical auxiliary systems. The most common applications are:
• Engine PTO pump drive chains: Transmit engine torque to hydraulic pumps at high speed — typically ANSI #50 or #60, running in oil-bath conditions inside the engine compartment.
• Cab A/C compressor drive chains: Power the air-conditioning compressor from the engine accessory drive — ANSI #40 or #50 in a partially enclosed environment.
• Cooling fan drive chains: On large mining excavators, hydraulic fan drives use ANSI #60 or #80 chains with high-precision sprockets for uniform fan speed.
• Track-drive auxiliary chains: Some crawler machines use roller chain segments in the final-drive reduction — heavy-duty ANSI #100 or #120 with 40Cr alloy sprockets.

Spesifikasi Teknikal

Parameter Earthmoving Value Julat
Chain Standard (engine PTO) ANSI #50 / #60 ANSI #40–#80
Chain Standard (track final drive) ANSI #100 / #120 ANSI #80–#160
Material (engine PTO) C45 yang dikeraskan dengan induksi 40Cr alloy for high-shock drives
Material (track/final drive) 40Cr alloy steel —
Kekerasan Gigi HRC 50–62 HRC 48–65
Case Depth 1.5–3.5 mm Up to 5 mm
Vibration Resistance High (earthmoving) —
Gaya Hab Type B finished bore (engine) Type C double hub (track drives)
Toleransi Lubang H7 H6 for precision pump drives
Permukaan Black oxide (enclosed engine) Dacromet (external drives)
Strand Simpleks Duplex for high-power final drives
Operating Temperature −30°C to +120°C Engine compartment range
Pelinciran Oil-bath (engine PTO) Manual (external drives)
Gred Pemesinan DIN Gred 6 —
Max Pitch Line Load Up to 30,000 N Final-drive track chains
Shaft Diameter Range 30–180 mm Up to 250 mm custom
Dokumentasi Batch cert / MTC 3.1 Mine-site requirement
Shock Load Rating Very high (earthmoving) —
Weight (ANSI #80 Z=17) ~3.8 kg 1.5–60 kg (full range)

Kelebihan Prestasi

💪Earthmoving-Grade Alloy Steel40Cr alloy steel with deep case hardening (HRC 52–62) is specified for all high-shock earthmoving drive applications. The alloy core (Charpy 40–60 J) absorbs the extreme vibration and shock loads endemic to excavator and bulldozer operation without tooth fracture.
🌡High-Temperature StabilityEngine-compartment temperatures on large earthmoving machines can reach +120°C in Australian summer conditions. Our sprockets maintain dimensional accuracy and tooth geometry at these sustained temperatures, preventing the bore expansion that causes fretting and noise.
🔊Vibration-Resistant Bore FitH7 finished bore with Loctite 638 retaining compound (applied at installation) prevents the bore fretting and micro-movement that causes sprocket loosening under the continuous vibration of earthmoving operation — a common failure mode with generic import sprockets.
📏OEM-Compatible InterchangeableWe manufacture interchangeable replacement sprockets for all major earthmoving equipment OEM specifications. Provide the OEM part number, chain pitch, tooth count, and bore specification and we will supply an equivalent replacement.
🔐Mine-Site DocumentationEN 10204 3.1 material certificates and dimensional inspection reports for 40Cr alloy steel earthmoving sprockets — meeting the quality management requirements of Australian mine-site maintenance programmes and ISO 55001 asset management systems.
⚡Rapid Australian DispatchCommon ANSI #50–#100 earthmoving sprockets in standard tooth counts and bore sizes are maintained in Australian stock for rapid dispatch — minimising machine downtime on critical mine-site earthmoving fleet maintenance.

Maklumat Keserasian

Machine / Drive Position Sproket yang Disyorkan Nota
Excavator hydraulic pump drive (ANSI #50) ANSI #50 C45 hardened sprocket Engine compartment oil-bath drive
Bulldozer fan drive chain (ANSI #60) ANSI #60 precision sprocket Grade 6 for smooth fan speed
Large excavator final drive (ANSI #100) ANSI #100 40Cr alloy sprocket High shock; Type C double hub
Motor grader auxiliary drive (ANSI #50) ANSI #50 finished bore sprocket Open-environment dacromet coat
Compactor drive chain (ANSI #60) ANSI #60 induction-hardened sprocket Vibration-resistant bore fit required
Komatsu, Caterpillar, Liebherr (ref only) ANSI equivalent per chain measurement Brand reference for cross-ref only
Hitachi, Volvo, John Deere CE (ref only) ANSI or ISO equivalent Confirm chain standard & tooth count

Panduan Pemilihan

📏 Machine type & position Engine PTO/pump drive: ANSI #50 or #60 C45 hardened. Fan drive: Grade 6 precision ANSI #60. Final/track auxiliary: ANSI #80–#120 40Cr alloy. Identify position first to determine load and precision requirement.
🔥 Load & shock factor Calculate peak pitch-line load including shock factor (2.5–5× for earthmoving). If load exceeds C45 rating, specify 40Cr alloy steel. Our engineering team can perform a load calculation from motor rating and drive ratio.
🔧 Bore & hub specification Engine compartment drives: H7 finished bore with Loctite 638. External drives with vibration: H6 bore with double key. Track/final drives: Type C double hub, solid bore, H6 minimum.
📋 Documentation for mine site Specify EN 10204 3.1 material cert for all 40Cr alloy sprockets. Hardness test certificate and dimensional report also available on request for mine-site QMS compliance.

Installation for Earthmoving Equipment Sprockets

  1. Machine LOTO: Apply site earthmoving equipment LOTO procedure. Park with all implements lowered, hydraulics depressurised, electrical isolated.
  2. Allow engine to cool below 50°C before accessing engine compartment chain drives.
  3. Drain oil from engine PTO gearbox if replacing internal sprockets. Catch oil in approved container; do not allow contamination of surrounding ground.
  4. Tanggalkan gegancu lama with two-jaw puller. For heavy track-drive sprockets, use certified lifting equipment rated for the sprocket weight.
  5. Inspect shaft and keyway. Apply Loctite 638 retaining compound (not thread-lock) to the shaft bore interface before installing the new sprocket.
  6. Install new sprocket with hydraulic press or bearing heater for H6 fits. Torque all fasteners to specification.
  7. Align drive and driven sprockets with precision straight-edge or laser tool — target ≤0.5 mm lateral offset. Earthmoving machine vibration amplifies misalignment effects.
  8. Install chain, set tension per OEM service manual. Refill oil to specified level.
  9. Run at low idle for 15 minutes before full-load operation. Check for oil leaks and unusual noise.

Troubleshooting Earthmoving Sprockets

Simptom Punca yang Mungkin Tindakan yang Disyorkan
Engine compartment sprocket loosening Vibration-induced bore fretting Remove; apply Loctite 638; reinstall to H6 tolerance
Rapid tooth wear (dust exposure) External drive without adequate enclosure Add sealed chain guard; dacromet sprocket
Chain jumping on fan drive Worn precision sprocket causing velocity ripple Replace with Grade 6 CNC-hobbed sprocket
Bore cracking on track drive Under-specified material (C45 in shock application) Replace with 40Cr alloy steel sprocket
Chain overheating in engine compartment Insufficient lubrication at high temp Verify oil-bath level; upgrade to ISO VG 220

Kajian Kes Pelanggan Australia

Kevin T. — Kalgoorlie, WA★★★★★Fleet Maintenance Manager, Surface Mining
“We standardised on Ever-power 40Cr alloy ANSI #80 and #100 sprockets for all our excavator and dozer auxiliary drive positions. The EN 10204 3.1 documentation satisfied our mine-site quality management requirements and the tooth life is significantly better than what we were previously achieving.”

April 2025
Luke F. — Mackay, QLD★★★★★Workshop Manager, Open-Cut Mine
“Fitted Ever-power sprockets to our dozer fan drive and hydraulic pump drive chains. 18 months of operation in the hot, dusty open-cut environment without failure. The dacromet coating on the external drives has held up well against the fine coal dust.”

February 2025
Sarah B. — Port Hedland, WA★★★★☆Equipment Engineer, Iron Ore Mine“Operating in the NT means extreme heat and dust. The dacromet-coated Ever-power sprockets on our motor grader auxiliary drives have held up far better than the generic alternatives we used to specify. Will continue with this supplier.”

March 2025

Soalan Lazim

► What ANSI chain size is typically used in excavator hydraulic pump auxiliary drives?
Most large hydraulic excavator pump drives use ANSI #50 (15.875 mm, 5/8") or ANSI #60 (19.05 mm, 3/4") roller chain in an oil-bath environment within the engine compartment. The exact specification varies by machine size and manufacturer — consult the machine service manual or provide the machine model for our team to identify the correct specification.
► Can I use standard C45 induction-hardened sprockets on earthmoving equipment?
C45 induction-hardened is acceptable for engine PTO drives (pump drive, A/C compressor drive) operating in oil-bath conditions at moderate loads. For high-shock external drives, final-drive auxiliary chains, and crawler track-drive positions, 40Cr alloy steel with deep case hardening (HRC 52–62) is required to withstand the combined vibration, shock, and contamination environment.
► How do I prevent sprocket loosening due to earthmoving machine vibration?
Use an H6 bore tolerance (tighter than standard H7) for precision shaft fit. Apply Loctite 638 retaining compound (not thread-lock) between the bore and shaft at installation. Use a double-key design on large sprockets. Torque set-screws to specification and re-check after the first 50 hours of operation. For critical positions, use a mechanical retaining ring in addition to the set-screw.
► Do earthmoving equipment sprockets require alignment?
Yes. Misalignment accelerates chain and sprocket wear significantly — even 1 mm lateral misalignment on a vibrating earthmoving machine can halve sprocket service life. Use a precision straight-edge or laser alignment tool to achieve ≤0.5 mm lateral offset after installation. Re-check alignment at the first major service after a sprocket change.
► What lubrication is required for engine compartment earthmoving chain drives?
Engine PTO and pump-drive chains in earthmoving equipment are typically lubricated by oil-bath or splash lubrication from the engine or gearbox oil. Use ISO VG 150–220 gear oil (or the OEM-specified oil) at the correct level. For external drives (fan drive, compressor drive) without oil-bath, apply ISO VG 68 chain oil manually every 100–200 operating hours or per the machine service manual.
► Can you supply OEM-equivalent replacement sprockets for Caterpillar, Komatsu, and Liebherr earthmoving equipment?
Yes. We supply dimensionally interchangeable replacement sprockets for all major earthmoving equipment OEM specifications. Provide the OEM part number, machine model, or chain and bore measurements, and we will identify and quote the correct replacement. OEM brand names are referenced for cross-identification only.
► How long do earthmoving equipment chain drive sprockets typically last?
In engine-compartment oil-bath drives: 10,000–20,000 operating hours for C45 induction-hardened sprockets. In external dusty environments: 3,000–8,000 hours for C45; 8,000–15,000 hours for 40Cr alloy with proper lubrication. Final-drive and track-position 40Cr alloy sprockets typically last 12,000–25,000 hours under normal mining conditions.
► What documentation do you provide for mine-site earthmoving sprocket maintenance?
We provide EN 10204 3.1 material test certificates for all 40Cr alloy steel sprockets, dimensional inspection reports, and hardness test certificates. For large orders or OEM supply programmes, we can provide First Article Inspection (FAI) reports and ongoing Certificates of Conformance (CoC) per delivery.
► Do you supply sprockets for undercarriage and crawler track systems?
We supply roller chain sprockets for auxiliary crawler and undercarriage drives where roller chain (ANSI #100–#160) is used. We do not supply ground-engagement track shoes, links, or idler wheels for the main crawler undercarriage (these are a different product category). For auxiliary track-drive roller chain applications, our 40Cr alloy heavy-duty sprocket range is appropriate.
► What is the minimum order for earthmoving equipment sprockets?
No minimum order — single-piece urgent maintenance orders are accepted. For standard ANSI #50–#100 sprockets in common tooth counts and bore sizes, we dispatch from Australian stock within 1–3 business days. For 40Cr alloy or custom bore specifications, typical lead time is 7–14 days. Contact us for current stock availability.

Produk Berkaitan: Rantai Transmisi

Rantai Penghantaran Roller

⛓️ Rantai Transmisi yang Serasi

Kami mengeluarkan dan membekal pelbagai jenis rantai penghantaran roller digandingkan dengan setiap gegancu — ANSI, ISO, double-pitch, keluli tahan karat dan rantai tujuan khas untuk semua aplikasi perindustrian.

Lihat Rantai →

Piawaian & Persijilan

Semua sprocket Ever-power Australia dihasilkan mengikut piawaian antarabangsa berikut:

✓ ISO 9001:2015✓ ANSI B29.1✓ ISO 606✓ DIN 8187✓ JIS B 1801✓ Piawaian BS

Komitmen kualiti: Pemeriksaan dimensi 100%, ujian kekerasan kelompok dan kebolehkesanan penuh pada setiap pengeluaran. Sijil ujian bahan tersedia atas permintaan.

Kilang Ever-power

Mengapa Memilih Ever-power Australia?

Kami merupakan pengeluar sproket bersepadu secara vertikal dengan kepakaran pemacu rantai selama lebih 25 tahun. Kemudahan seluas 35,000 m² kami menghasilkan lebih 4 juta sproket setahun mengikut piawaian ISO, ANSI, JIS, DIN, BS dan GB, serta diperakui ISO 9001. Pembuatan kami →

ISO 90014J+ keping/tahunMampu OEMSaham AU

Bersedia untuk Memesan atau Perlukan Khidmat Nasihat Teknikal?

Pasukan kejuruteraan kami menyediakan sokongan pemilihan percuma dan sebut harga pantas. Stok Australia untuk saiz teras — penghantaran minggu yang sama untuk sprocket standard.

📩 Dapatkan Sebut Harga Percuma 🔍 Layari Produk