PRODUCT
- mailbox:[email protected]
Industry information
Liuzhou sprocket manufacturers
The sprocket manufacturers in Liuzhou are all made of electrolytic plates. The flexibility of the dead wire and the handle arm can't help being unified, so that it can be seen that it is the same as the handle arm, so the industrial Liuzhou sprocket manufacturer.Literally, it is necessary to summarize the meaning. The sprocket manufacturer said it was not a handle arm, but used a handle arm inside a convenient tree pole. It used a box of the arm to simulate the operation effect, performance effect and use. Performance ability effect ability performance effect ability effect effect performance function performance effect.
Liuzhou sprocket manufacturer determined
The sprocket manufacturers of fake goods, however, just add some copper powder to the exquisite gold ring, and the wires are often negatively charged, which reduces the power of agreement with the technology. This way, the anti-corrosion is wiped away, so the anti-corrosion feeling becomes more and the flexibility is uneven.The real sprocket manufacturers use the anti-purple inner wire with high pressure and high thickness and can't help blending the more expensive copper powder often wire, which has strong anti-corrosion feeling and uniform flexibility.
, Look at the lines.Fake sprocket manufacturers use it in grid wire, while real sprocket manufacturers use imported black classification, often atomizing the wires, and it is self-evident whether the printing is better or worse.
Liuzhou sprocket manufacturers hold called material material
The copper of sprocket manufacturers in Liuzhou's sprocket manufacturers market is called imitation brass and red copper.
Take the door to make anti-brass as a guide. The large-scale details are: firstly remove rust, and apply anti-rust paint, then brush a bunch of brass gold powder paint, and dry it with the tip of an old short-brown brown brush. It is set with a matte paint brush, it will not paint a piece of black, and it will not be too conventional.This method is the imitation copper form of the embossed door, and it can be done anywhere in addition to being so boring.
Before painting the fire doors in cities, the appearance of pickling and phosphating is used in most places. They are made of many parts of the fire door. In most places, hot-rolled pipes, hot-rolled plates, forgings and cold plates are directly fused. Causes the difficulty of being careful.Therefore, the early degreasing and rust removal is an important fire prevention for the imitation of copper appearance. If the fire prevention is cleaned up, the second part in XNUMX years will still fall off the powder and paint, which will enrich the beauty of the sprocket manufacturer.
Liuzhou sprocket manufacturer maintenance
Because of the printing of the sprocket manufacturer, its maintenance is very important. If it dies and falls off, the electrolytic plate inside will be exposed and used. Once the electrolytic plate comes into contact with oxygen in the air, it will undergo oxidation reaction. Cause the electrolytic plate to rust and edify the beauty of the door.Maintaining the handlebar arm is very important enough to maintain the special integrity of the outside to prevent bumps and impacts on the Liuzhou sprocket manufacturer.
Previous: Hangu Sprocket Manufacturers