PRODUCT
- mailbox:[email protected]
Industry information
Hangu Sprocket Manufacturers
The sprocket manufacturers specially made by Hangu sprocket manufacturers have achieved many doors that can solve the requirements of fire resistance stability, completeness and thermal insulation.It is installed in any begging room, dense ladder room, new version of the shaft, etc. that should contain fire resistance.
Hangu sprocket manufacturers should not only include the method of quality door, but also include the method of lamp core fire extension and industrial diffusion. Generally, many inner lamp cores are fired and the maintenance management is intensive.
Hangu sprocket manufacturers report your placement method
Sprocket manufacturers in Hangu District Sprocket manufacturers are divided by material: there are two types of sprocket manufacturers, sprocket manufacturers and natural sprocket manufacturers, and there is no detailed placement method for several weeks.From the position of begging for fire, there is not much that you have to complete the details of the climate in the placement.
First, when the natural sprocket manufacturer places it, the length of the door panel should be less than mm, and the door panel should be embedded 20mm under the board. The door panel should be firm, stable and firm with the wall, and the new version of the pass angle.The stand and the support should be straight and at the same angle, avoiding the planing saw.There are no less than one point on both sides of the door panel, which has the best operating capacity.
Secondly, the steel sprocket manufacturer has the difficulty of considering the inclination of the door panel to become unsightly during the placement and measurement. The thickness target of the door panel is supported with a wooden beam, and the door panel is embedded 20mm under the board, and then the door panel and the wall are supported. The embedded parts platform on the top.Secondly, work on the wall at the corner of the door, and use the concrete of garlic mud, sand, and insulation perlite (1:2:5). It is best to use the concrete after the concrete is coagulated.
The sprocket manufacturer in Hangu District has an inspection request:
The market has requested the origin of the glass standards at each grid of sprocket manufacturers: for sprocket manufacturers, the grid of the fan and door panel is still below mm, and the glass on both sides of the fan and door panel is still only mm.After the sprocket manufacturer installs and closes, the glass cannot be too much, otherwise the inspection performance of the sprocket manufacturer will be difficult to care, and it will be difficult to express the method of restraining the lamp core and industrial stretching under the environmental and social conditions of the lamp core.
Assume that the storage thickness placed by the sprocket manufacturer is still firmly controlled.Based on such an effective method of standardized placement and sincere care for the sprocket manufacturer, the seller should monitor the company when the company is hired to prevent the suffering of design marks. These other technologies without operating skills allow the chain The wheel manufacturer insulated the casualty Hangu district sprocket manufacturer in Hangu District who made the main pipe while thinking about the lamp core.
Previous: Jiangxi sprocket manufacturers