PRODUCT
- mailbox:[email protected]
Industry information
How to use the worn sprocket reasonably
If there is no friction, the two objects cannot move with each other, the car cannot move back and forth without friction, and the shoe cannot move forward without the friction between the shoes and the ground.Friction may seem simple, but it is a very important term.This seems to be indispensable, but we cannot deny that there will be wear when there is friction,SprocketThere is such a relationship between the two and the chain, and the two interact with each other, and there is a while to each other.
The degree of wear is different. We have to deal with it according to the situation. After the sprocket wears, first see if it is serious. If it is a small area of wear and can continue to be used, mark it clearly. Not only do routine maintenance, but more importantly. It is to pay attention to the wear and tear in the process of use, so that it can be replaced in time, and our loss can be minimized.If it is serious, the sprocket should be replaced in time, and the chain should be replaced at the same time to ensure good meshing.If you simply replace the sprocket, the mesh is not good, and it will accelerate the wear of the sprocket. In terms of grinding, although the cost was reduced at that time, your loss will be much greater in the long run!
In addition, in order to ensure that the chain drive has a good application effect, we must require the sprocket factory or self-designed drawings to perform the necessary heat treatment on the material.This will not only increase its use effect, but also maximize its performance during use and reduce economic losses.