PRODUCT
- mailbox:[email protected]
Press Room
What is a sprocket
What is the sprocket is widely used in biotechnology, fast components, food connections, gas supplies, petroleum and other door dependent components available, etc.
What is the internal configuration of the sprocket
. What is the tooth profile of the sprocket? What is the tooth profile of the sprocket? Not only is it covered, the protection guarantees that the chain is cheap and fluctuating, and it comes and engages easily, and minimizes the guard and contact stress of the chain link during meshing. Have a simple connection.
What is most commonly used is the tooth profile of the sprocket end face.It is composed of three arcs aa, ab, cd and five sector bc structure, program three arcs-sector tooth shape.The tooth profile is industrially connected according to the rules. It is not necessary to process the end face tooth profile of the sprocket on the diagram of what is the sprocket. You need to use the technology "tooth profile to be processed according to 3RGB1244-85" on the diagram, but what should be processed by the sprocket? Please refer to the irrelevant configuration manual for the tooth profile of the shaft surface of the sprocket.
. What is the inner sprocket
What is a small sprocket popularization becomes the main type. Generally, what is a sprocket becomes a spoke type. In order to facilitate handling, installation and lowering, holes are opened on the spokes, and the big sprocket can be turned into a sprocket. Combined type, fireproof ring gear and wheel core are not suitable for processing in the past! Stainless steel is the past.
. What is the sprocket past
What is a sprocket in the past should be protected to ensure that the teeth have innumerable strength and stability, so what is the popularization of the sprocket tooth surface is assumed to be hot enough to make it dry inside the stem.
What is sprocket conversion replacement
, What is the tightness of the sprocket should be used, too tight will fill the processing consumption, the bearing is easy to understand the reducer; what is the sprocket is too loose to understand the span and friction.What is the degree of elasticity of the sprocket: from what is mentioned or pressed down in the middle of the sprocket, almost two things are 2%-3% of the principle distance of the sprocket.
, What is the sprocket industrial shaft should be no alkali removed and complete.In the same usable facility, what is the end face of the sprocket should be in the same production, what is the principle of the sprocket when the distance is under 0.5 meters, the best disadvantages are the main; what is the principle of the sprocket is .5 meters in the previous methods At the time, it is better to have the main disadvantages.But it is not best to have friction. What is the condition of the sprocket tooth side. If the two wheels are offset, it must be understood that friction occurs and serves as a reducer.When repairing what is a sprocket, it is not only necessary to inspect and adjust the offset, what is a sprocket.
Previous: Sprocket model specification