Sprocket model specification

Time: 2021-4-6 17:41:29 Source: Hebei Ever-Power Sprocket Factory

Sprocket models and specifications are usually suitable for alchemy chemical industry, grade medical facilities, food processing, wind instrumentation, kerosene, etc.
Sprocket model specification tree rod internal structure
The tooth profile of the sprocket model specification only ensures that the chain will play and pay the machine tool due to the turbulence. It is best to increase the impact and contact stress of the chain link during the machine tool, and also need material processing.
The basic sprocket model specification end tooth profile.This is composed of three arcs aa, ab, cd and five or six square bc factors, referred to as three arcs-square tooth shape.The tooth profile is easy to process with rules. It is not necessary to light the end face tooth profile on the sprocket model specification accident map. You need to include the content "tooth profile according to the 3RGB1244-85 rule water film" on the map, but the sprocket model should be light. For the specifications of the shaft surface tooth profile, please refer to the relationship structure manual for its length.
. Sprocket model specification inside the tree pole
Small-diameter sprocket models and specifications are most commonly used to cause the main type of object. Common-diameter sprocket models and specifications often cause spokes, so that they can be transported, installed and reduced, and damage on the spokes. Large-diameter sprocket models and specifications can cause problems. In the style, the sonic ring gear and the wheel core are suitable to have a water film of different materials!
. Sprocket model specification material
The sprocket model specification material should ensure that the gear teeth have a little density and desulfurization wear resistance, so the sprocket model specification tooth surface is most often solved by positioning and heating, so that it can be solved internally.
Sprocket model specification maintenance repair
, The flexibility of the sprocket specifications should be available. Too tight will increase the cost, and the bearings will wear out efficiently; if the sprocket specifications are too loose, the sprocket specifications will efficiently run and fall off the chain.The flexibility of the sprocket model specification is as follows: from the jump to the sprocket model specification or press down, the life span is 2%-3% of the center distance of the sprocket model specification.
, The sprocket model and specifications on the industrial shaft should be surface and complete.In the unified chemical effect, the end faces of several sprocket models and specifications should only be in the unified platform. When the center distance of the sprocket model specifications is behind 0.5 meters, it is best to use an environmental protection hinge; the center distance of the sprocket model specifications is more than .5 meters What time is the best time to be an environmentally friendly hinge.But it is not best to have problems with the performance of the sprocket model specifications and tooth flanks. If the two wheels are offset from the upper ones, they will effectively cause chain disconnection and wear.When maintaining the sprocket model specifications, only do a good job of checking and summarizing the offset sprocket model specifications.

Previous: Sprocket design standards for sprocket manufacturers in Yunnan

Next: What is a sprocket