Sprocket gear

Time: 2021-3-30 17:21:54 Source: Hebei Ever-Power Sprocket Factory

The sprocket transmission device is generally used in non-magnetic, dust-free components, gadget production, instrumentation equipment, transportation plants and other old components, chemical industry, etc.
Construction design of internal product internal product internal product of sprocket transmission device central accessory
. The tooth profile of the sprocket transmission device can only ensure that the chain investment fluctuates freely and the cost is rough, and the impact and contact stress of the chain link must be degraded when it is rough. In addition, material production is required.
General sprocket gear tooth profile.It is composed of three circular arcs aa, ab, cd and a certain circular bc composite part of the structural structure material composition, referred to as three circular arcs-circular tooth shape.The tooth profile is produced by a combination of rules. It is not necessary to show the tooth profile of the end face of the sprocket on the various drawings of the sprocket transmission. Just use the label "tooth profile as 3RGB1244-85 to mark the industry" on the map, but it should be Jingjiang sprocket sprocket For the tooth profile of the shaft surface of the transmission, refer to the standard reference to reflect the construction design manual.
. The internal product structure of the central part of the sprocket drive
The small-effect sprocket transmission device is almost the main type of the object, and the medium-effect sprocket transmission device is mostly the spoke type, which can be transported, installed and reduced. The electric power on the spoke plate, the large-effect sprocket transmission device can be combined, The range of gear ring and wheel core is practical but not made of industrial materials! No other materials are used.
. Sprocket gear material
The material of the sprocket transmission device should ensure that the gear teeth have countless hardness and operability, so the tooth surface of the sprocket transmission device is almost all marked with thermal solution, so that it can be manufactured.
Sprocket drive is maintained and repaired
, The tightness of the sprocket transmission device should be appropriate, too tight will determine the power investment, the bearing is easy to reducer; too loose the sprocket transmission device is easy to jump and fall off the chain.The elastic trader tax of the sprocket transmission device is: lift or press down from the middle of the sprocket transmission device, and reduce the original intention distance between the two sprocket transmission devices by 2%-3%.
, The sprocket transmission device guarantees that there should be no alkali swing and satisfaction on the shaft.In the same chemical industry and chemical industry facilities, the end faces of five or six sprocket transmissions should be in the same production. The sprocket transmission can be effectively connected when the original intention distance of the sprocket transmission is 0.5 meters; the original intention distance of the sprocket transmission is .5 meters The above time can be effectively connected.However, there can be no friction sprocket transmission device to lift the teeth, so too much deviation of the two wheels is easy to cause chain-off and steel-reinforced reducer.When guaranteeing the sprocket transmission, the only way to do a good job is to check and summarize the offset sprocket transmission.

Previous: Handan sprocket manufacturer production

Next: Sprocket chain coordination