PRODUCT
- mailbox:[email protected]
Press Room
Purchase sprockets
The purchased sprocket is normally and skillfully used for color, air equipment, machinery, gadgets, appearance quality, shape and other equipment machinery and equipment, etc.
Procurement of sprocket product equipment
. Procurement of the tooth profile of the sprocket Procurement of the sprocket tooth profile is probably to cover, ensure protection, ensure that the chain is cost-effective, energy-saving, stable and convenient to participate in and spend the link, it is best to reduce the assault protection impact and isolation stress of the chain link during linking, and also simple Cause.
The overall tooth profile of the procured sprocket.It is flattened by three arcs aa, ab, cd and some industrial bc, program three arcs-industrial tooth profile.The tooth profile is caused by the indication of alkali resistance. You do not need to freely use the tooth profile on the sprocket to work map. Only use the title "tooth profile to be made according to 3RGB1244-85" on the map. It is OK, but you should freely purchase the sprocket shaft tooth profile. Shape, its perimeter refer to the equipment manual of great importance.
. Purchasing sprocket products
The small-impact purchase sprocket basically makes it possible to make it into the main type. Generally, the purchase sprocket makes it possible to make it into a spoke type. For easy handling, installation and weight reduction, damage on the spoke plate will cause great Procurement of sprocket can make it possible to make it into alkali-resistant type, the use of fireproof ring gear and wheel core is not made of letterpress!, stainless steel and other letterpress.
. Procurement Sprocket Toppan
The top plate of the purchased sprocket should be protected to ensure that the gear teeth are a little bit industrial and damaged. Therefore, the tooth surface of the purchased sprocket is basically cleaned by the process to make it reach a certain level of industry.
Purchasing sprockets for mutual maintenance
, The tightness of the purchased sprocket should be appropriate. Too tight will increase the energy cost of asbestos, the bearing is easy to understand and envelop the toroidal worm reducer; the purchase of sprocket is too loose to understand the runout and distance.The tightness of the procurement sprocket is: from the tightness of the procurement sprocket to or down, it is about 2%-3% of the expert distance between the two procurement sprocket.
, There should be no shaking and complete verticality on the industrial shaft of the purchased sprocket.In the same use of components, the end faces of two people purchasing sprocket should be located on the same network. When the distance between the purchasing sprocket experts is 0.5 meters, it is best to be accurate; the distance between the purchasing sprocket experts is .5 meters in the spring days of the previous methods , The best distance is accurate.But it is not best to have the space of the sprocket to be found in the interrelated purchase, so the two-wheel offset above a few easy to understand the birth distance and reduce the envelope toroidal worm reducer.When purchasing sprockets from each other, you probably pay attention to checking and collecting offsets to purchase sprockets.
Previous: Scraper conveyor sprocket