PRODUCT
- mailbox:[email protected]
Press Room
Scraper conveyor sprocket
The sprocket of the scraper conveyor is usually suitable for the chemical industry, cold storage machinery, fruit requirements, face facilities, wheels and other door gun machinery, etc.
Scraper conveyor sprocket structure battle
. Scraper conveyor sprocket tooth profile. The sprocket profile of the scraper conveyor sprocket is basically the guard chain. It is cheap and good. It is easy to play and cost injection to match. It is best to reduce the occupation and contact of the chain link during the match. Stress, galvanized and easy to understand the requirements.
The end tooth profile of the sprocket of a general scraper conveyor is often used.This is also composed of three arcs aa, ab, cd and five or six diameters bc, referred to as three arc-diameter tooth profile.The instructions for tooth profile are easy to understand. There is no need to draw the end tooth profile on the sprocket of the scraper conveyor. You only need to label the "tooth profile manufactured according to the 3RGB1244-85 rule" on the map, but the scraper conveyor should be drawn. The tooth profile of the shaft surface of the sprocket, please refer to the manual for the length of the sprocket.
. Sprocket structure of scraper conveyor
The popularity of small-effect scraper conveyor sprocket triggers the main type of object, and the medium-effect scraper conveyor sprocket is more triggered by the spoke type. In order to facilitate handling, installation and reduction, the large-effect scraper conveyor sprocket is installed on the web. It can be connected. Nowadays, the gear ring and the wheel core can be made of different materials! There is no construction and other materials.
. Scraper Material of Scraper Conveyor
The sprocket material of the scraper conveyor should protect the gear teeth with countless connections and wear resistance. Therefore, the sprocket tooth surface of the scraper conveyor is popular to heat and dry, so that it can be cleaned up and made special.
Scraper conveyor sprocket repair guarantee
The sprocket of the scraper conveyor should have an appropriate degree of flexibility. If it is too tight, it will cost more. The bearing quickly envelops the toroidal worm reducer; if it is too loose, the sprocket of the scraper conveyor quickly jumps and is mainly used.The stretchable width of the sprocket of the scraper conveyor is: lifted or pressed down from the interlayer of the sprocket of the scraper conveyor, and lowered by 2%-3% of the key distance of the sprocket of the two scraper conveyor.
, The sprocket of the scraper conveyor should be vibrating and straight when installed on the shaft.In the same suitable parts, the end faces of some scraper conveyor sprocket should be in the same upper surface. When the key distance of the scraper conveyor sprocket is 0.5 meters, the thickness must be environmentally friendly; the key distance of the scraper conveyor sprocket is in the The autumn above .5 meters is definitely environmentally friendly.But it is not certain that there is a collision between the left and right sprocket teeth of the scraper conveyor. If the two-wheel offset is mainly quickly displayed and aggravated the enveloping toroidal worm reducer.When protecting the sprocket of the scraper conveyor, pay attention to check and summarize the offset of the sprocket of the scraper conveyor.
Previous: Industrial sprocket brand facilities
Next: Purchase sprockets