Kettenrad aus Edelstahl ISO 10B-1 (SS304)

Kettenrad aus Edelstahl ISO 10B-1 (SS304)

Der Stainless Steel ISO 10B-1 sprocket (5/8″×3/8″) in AISI 304 (SUS304) stainless steel delivers full corrosion resistance for food processing, pharmaceutical, marine, and chemical environment applications. Precision-hobbed to ISO 606 / DIN 8187 standards, it eliminates rust-contamination risk, withstands frequent high-pressure washdowns, and maintains dimensional accuracy throughout its extended service life.

Artikelnummer: 84fa462bd9be Kategorien: , , Schlagwörter: , , ,

Beschreibung

Stainless Steel 10B Sprocket

Technical Specifications — SS304 ISO 10B-1 Sprocket

Parameter Wert Anmerkungen
Chain ISO 10B-1 (DIN 8187)
Tonhöhe 5/8″×3/8″
Material AISI 304 / SUS304 1.4301 equiv.
Chromium Content 18–20%
Nickel Content 8–10.5%
Carbon Content ≤0.08%
Tensile Strength ≥515 MPa
Surface Finish Polished (Ra 0.8–1.6) / Plain
Operating Temp. –196 to +800°C Non-hardened
Teeth Range Z=12 – Z=30 (stock, ext. on request)
Standard ISO 606 / DIN 8187

Key Features

✨
Full SS304 Corrosion Resistance
18% chromium / 8% nickel austenitic stainless eliminates rust risk in wet, chlorinated, or acidic processing environments — no surface coating that can chip or peel.
Food-Safe Material
AISI 304 stainless is approved for direct food contact by FDA, EU 10/2011, and Australian FSANZ standards. Safe for CIP (clean-in-place) chemical sanitation protocols.
High-Pressure Washdown Rated
Withstands daily high-pressure (up to 100 bar) hot-water washdowns without dimensional change, corrosion, or surface degradation.
️
Wide Temperature Range
Maintains structural integrity and dimensional accuracy from cryogenic (–196°C) to 400°C operating temperatures — suitable for freezing tunnels and cooking equipment.

Anwendungen

Food Processing

Food Processing
Conveyor and portioning machine drives in meat, dairy, bakery, and beverage lines
Pharmaceutical Packaging

Pharmaceutical Packaging
Blister-pack, tablet-press, and sterilization equipment drives
Marine & Offshore

⚓ Marine & Offshore
Deck machinery, winch drives, and subsea equipment in salt-spray environments
Chemical Processing

⚗️ Chemical Processing
Drives in chemical reactors, mixers, and solvent-handling conveyors

Kundenrezensionen

“SS304 10B sprockets have been running on our meat-processing conveyor for 14 months without a single rust spot. The previous carbon-steel sprockets corroded within 3 weeks.”
— Anna F. ( Australia) · ★★★★★ · April 2025
SS304 ISO 10B-1 Z=19
“Perfect for our dairy bottling line. Withstands our 80°C caustic wash without any sign of pitting or surface change.”
— Sophie B. ( France) · ★★★★★ · February 2025
SS304 ISO 10B-1 Z=21
“Excellent finish quality. Slightly longer delivery than standard carbon-steel versions but worth the wait for stainless applications.”
— Taro N. ( Japan) · ★★★★☆ · January 2025
SS304 ISO 10B-1 Z=17
“We supply these to our pharmaceutical clients who require material certificates. Certificates supplied promptly with each order.”
— Klaus R. ( Germany) · ★★★★★ · March 2025
SS304 ISO 10B-1 Z=25

Häufig gestellte Fragen

►  Is SS304 suitable for all food processing environments?
SS304 is suitable for most food processing applications. However, for high-chloride environments (brine, seawater, or hypochlorite sanitisers above 200 ppm), consider SS316 (available on request), which offers superior chloride pitting resistance.
►  Can you supply material test certificates (MTCs)?
Yes. Material test certificates (EN 10204 3.1 or 2.2) confirming chemical composition and mechanical properties are available with each order on request.
►  Do stainless sprockets require lubrication?
Yes. While SS304 is corrosion-resistant, the chain itself still requires lubrication to prevent fretting wear. Use NSF H1 approved food-grade chain lubricant for food contact zones.
►  Is the tooth hardness lower than carbon-steel sprockets?
Yes. SS304 cannot be induction-hardened to the same level as C45. Tooth hardness is approximately HRB 90–96 (HRC 18–22 equiv.). For heavy-load applications requiring high tooth hardness, consider C45 with dacromet coating or SS316L hardfaced option.
►  What is the minimum order for custom tooth counts?
MOQ for custom stainless tooth counts is 10 pieces. Lead time is typically 3–4 weeks for non-stock sizes.
  1. Clean all contact surfaces; avoid carbon-steel tools that may embed iron particles and cause surface rust.
  2. Use stainless fasteners (A2 or A4 grade) to avoid galvanic corrosion at fastener points.
  3. Align sprockets; install stainless or SS-compatible roller chain.
  4. Lubricate with NSF H1 food-grade chain oil before initial start-up.
  5. Inspect for any chain elongation or tooth wear every 500 hours; replace chain before sprocket shows hook-tooth wear profile.
✓ ISO 9001:2015✓ ANSI B29.1✓ ISO/DIN 8187✓ JIS B 1801✓ BS/DIN-Standards✓ GB-Standards
Immer-Energie-Fabrik

Warum Ever-power Australia wählen?

Wir sind ein vertikal integrierter Hersteller mit über 25 Jahren Erfahrung im Bereich Kettenantriebe. Unser Werk erstreckt sich über 35.000 m² und produziert jährlich über 4 Millionen Kettenräder. Wir beliefern OEM-Partner, Distributoren und industrielle Direktabnehmer in ganz Australien mit Produkten, die den Normen GB, ISO, ANSI, JIS, DIN und BS entsprechen.

ISO 9001-zertifiziert
Mehr als 4 Millionen Stück pro Jahr
OEM-fähig
Australischer Lagerbestand verfügbar

Bereit zu bestellen? Fordern Sie noch heute ein kostenloses Angebot an!

Unser Ingenieurteam steht Ihnen rund um die Uhr zur Verfügung, um Sie bei Spezifikationen, kundenspezifischen Designs und Mengenrabatten für australische Unternehmen zu unterstützen.

📩 Angebot anfordern
 
🔍 Alle Produkte ansehen

Ähnliche Produkte