Oil pump sprocket

Time: 2021-4-10 16:05:52 Source: Hebei Ever-Power Sprocket Factory

The oil pump sprocket is generally suitable for chemical industry, rapid parts, food therapy, aerospace equipment, wheels and other parts of the bank, etc.
Oil pump sprocket supporting facilities and equipment
The tooth profile of the oil pump sprocket The tooth profile of the oil pump sprocket is smaller than that of the care chain. It is environmentally friendly and stable and easy to enter and exit from wear. Try to reduce the protection and contact stress of the chain link during wear, and it should be convenient to create.
The basic tooth profile of the oil pump sprocket.The dark field microscope is organized by three arcs aa, ab, cd and a certain straight line bc, referred to as three arcs-straight tooth shape.The tooth profile is made with target rule scissors. You don’t need any end face tooth profile on the oil pump sprocket body diagram. You need to indicate "the tooth profile is in accordance with the 3RGB1244-85 code industry" on the diagram, but the oil pump chain should be free. For the tooth profile of the shaft surface of the wheel, please refer to the relevant equipment manual for its specifications.
. Oil pump sprocket supporting facilities
The small round oil pump sprocket is generally used for the severe type, and the medium round oil pump sprocket is mostly used for the spoke type. For easy handling, installation and lowering, it is outside the spoke plate. The large round oil pump sprocket can be used The one-piece type, the fireproof ring gear and the wheel core can be used not in the material industry!, not in the machine and other materials.
. Oil pump sprocket material
The oil pump sprocket material should have sufficient regularity and abrasion of the gear teeth. Therefore, the tooth surface of the oil pump sprocket generally can be cleaned by heat to make it as hard as possible.
Oil pump sprocket repair and maintenance
, The speed of the oil pump sprocket should be practical, too tight will increase precision consumption, the bearing is easy and convenient and easy to carry; the oil pump sprocket is too loose, easy and easy to jump and two wheels.The height, thickness, width and height of the oil pump sprocket is as follows: from the oil pump sprocket mentioned or pressed down, reduce the center distance of the two oil pump sprocket by 2%-3%.
, The safety shaft of the oil pump sprocket should be vibrated and possible.In the same block of anticorrosion, the end faces of the two oil pump sprocket should be in the same production. When the center distance of the oil pump sprocket is shared below 0.5 meters, it can also be called deviation; the center distance of the oil pump sprocket is above .5 meters. In winter, it can also be called deviation.But there can be no encounters, the oil pump sprocket teeth are best found, so the two-wheel offset climate is easy and convenient.When servicing the oil pump sprocket, check and correct the offset of the oil pump sprocket.

Previous: Qingzhou sprocket manufacturers

Next: Hubei sprocket manufacturer testing equipment