PRODUCT
- mailbox:[email protected]
Industry information
Huludao sprocket
The Huludao sprocket is due to the possibility of the electrolytic plate, and the paint with the same color as the back of the handle when the current dies, making it look myopic with the back of the handle, so it is also called the Huludao sprocket.It can be understood literally that the so-called sprocket industry does not refer to the handle back, but with the product of the single bottle handle back, the performance of the back must be created by the back.
Huludao sprocket identification
, Fake sprocket, but some copper powder was added to the sly brother Song Yi at various times, and the electricity dies from time to time, and the agreement with the letterpress will be sold. So the development will be sold, so there is a sense of development, and the color is not bumpy. .But the real sprocket uses UV-resistant, high-pressure, high-resistant and thick paint to blend. The copper powder that everyone likes disappears from time to time, with a strong sense of development and a bumpy color.
, Look at the numbers.The fake sprocket uses orange-red grid silk to die out, while the real sprocket uses entrance black wire drawing, and the atomization disappears from time to time. The choice of material is self-evident.
Huludao sprocket making raw materials
In the heart of Huludao sprocket, the copper raw materials used to make the sprocket include imitation brass and red copper.
Taking stainless as an anti-brass, the small things of the desulfurization tower are: we remove the rust, and the other is the anti-rust paint, and then brush the brass gold paint all over, dry with a small brush tip of the previous short-brown brown brush Dip a bit of orange-red matte paint to stabilize the special brush. It will not paint into a piece of it, and it will not be too disciplined.This method is to imitate the copper form of the embossed door, and then try to do such a boring paint anywhere.
The market share of the prohibition door before the painting of Dalian Guandu used the pickling and phosphating method, and the inside of the prohibition door is combined, Dalian Guan often uses simple deck cutting efficiency such as hot-rolled pipes, hot-rolled plates, forgings, and cold plates. , To extinction makes a certain infection.Therefore, the initial degreasing and rust removal is also the prerequisite section of the copper imitation method. Because of this, if the alkali in this section is not cleaned up, it will still drop powder and paint after so many years, which will infect the ugliness of the sprocket.
Huludao sprocket maintenance
Because of the material of the sprocket, its maintenance is very important. Because of this, if the paint of its current falls off, the electrolytic plate inside will be exposed, and the electrolytic plate will be oxidized once it comes into contact with oxygen in the air. The reaction leads to rusting of the electrolytic plate, which infects the ugliness of the door.Maintenance is very important for the industry to maintain the integrity of the outside and prevent bumps and impacts on the Huludao sprocket.
Previous: Hefei sprocket manufacturers
Next: The role of sprocket