Anyang chain sprocket

Time: 2020-5-27 16:05:50 Source: Hebei Ever-Power Sprocket Factory

Anyang chain sprockets are widely used in special mechanical transmissions such as color, grade machinery, east-west small holes, charming high-tech, sprocket, etc.
Anyang chain sprocket structure construction
. The tooth profile of the Anyang chain sprocket Anyang chain sprocket can only be protected and protected to ensure that the chain is economical. Put into and put into the CNC freely, and try to reduce the attack and the stress of the chain link during the CNC. The plug should have the advantage of the small hole. .
The popular Anyang chainSprocketEnd tooth profile.It will consist of three arcs aa, ab, cd and four square bc structures, referred to as three arcs-square tooth shape.The tooth profile is to be holed according to the specifications. There is no need to stabilize the end tooth profile on the Anyang chain sprocket incident. You only need to bookmark the "tooth profile to be manufactured according to 3RGB1244-85", but the Anyang chain sprocket should be stabilized. For the tooth profile of the shaft surface, refer to the relevant construction manual for its length.
. Anyang Chain Sprocket Structure
The small trapezoidal Anyang chain sprocket looks as thrilling as a whole, while the flat trapezoidal Anyang chain sprocket mostly becomes a spoke type. In order to be able to carry, install and reduce weight, small holes in the spoke plate, the large trapezoidal Anyang chain sprocket It can be turned into a connected type. At this time, the ring gear and the wheel core are suitable for dust removal manufacturing with different profile content materials, and no rust and other profile content materials.
. Anyang chain sprocket profile content material material material
The content of the Anyang chain sprocket profile material should be protected and protected to ensure that the gear teeth have countless development of hardness, strength and wear resistance. Therefore, the overall appearance of the Anyang chain sprocket tooth surface is thermally removed to make it windowable.
Anyang chain sprocket wiring guarantee
, The tightness of Anyang chain sprocket should be applied, too tight will increase the cost, simple bearing gear box reducer reducer; too loose Anyang chain sprocket simple high jump and but not.Sincerely, the elasticity of Anyang chain sprocket is as follows: from the spring of Anyang chain sprocket jump or press down, it is about 2%-3% of the principle distance between two Anyang chain sprocket.
, Anyang chain sprocket should be free of delamination and parallel level on the intact shaft.In the same transmission equipment mechanical equipment, the end faces of two Anyang chain sprockets should be in the same steel bar. When the principle distance of Anyang chain sprocket is 0.5 meters, these are probably eliminated; the principle distance of Anyang chain sprocket is .5 The time below meters is probably eliminated.However, it is unlikely that there will be friction between the Anyang chain sprocket teeth, so too much offset between the two wheels is simply caused but not the same as the gear box reducer reducer.When repairing Anyang chain sprocket, only attention can be paid to inspection and summary of offset Anyang chain sprocket.

Previous: Stainless steel Shaoxing sprocket

Next: Which Yuncheng sprocket manufacturer is better