PRODUCT
- mailbox:[email protected]
Industry information
Grooved Yancheng sprocket
Groove-type Yancheng sprockets are widely used in the chemical industry, grade effects, fruit power, appearance equipment, products, etc.
Inside design of grooved Yancheng sprocket
. The tooth profile of the groove type Yancheng sprocket is also many more than less than greater than less than less than exceeding. It is necessary to maintain the inside of the chain to play and enter the mesh smoothly and lightly, and probably the preemption and preemption of the chain link during the landing. Isolate the stress and understand the power easily.
The popular grooved Yancheng sprocket has a tooth profile on the end face.It is composed of three arcs aa, ab, cd and some straight bc materials, and three arcs-straight tooth shape are installed.The tooth profile is specified to facilitate power. It is not necessary to stabilize the end tooth profile on the grooved Yancheng sprocket plan. If you copy the "tooth profile according to the 3RGB1244-85 rule" on the drawing, it is enough, but the grooved Yancheng should be stabilized. For the tooth profile of the shaft surface of the sprocket, please refer to the relevant design manual for the specifications and dimensions of the position.
. Inside the grooved sprocket in Yancheng
The grooved type sprocket for small parts is almost integrated, and the grooved sprocket for plain parts is mostly spoked, so that it can be transported, loaded and reduced. Electricity is placed on the spokes, and the grooved type of large parts is used for Yancheng chain. The wheel can be combined. The current ring gear and the wheel core are not processed by raw materials! The raw materials are not of different degrees.
. Groove type Yancheng sprocket material
The raw material of the grooved Yancheng sprocket should maintain the gear teeth with proper hardness and desulfurization and wear resistance. Therefore, the tooth surface of the grooved sprocket is almost all summarized in the process. It may be achieved as hard as possible.
Groove sprocket line retention
, The tightness of the grooved Yancheng sprocket should be available, if it is too tight, the technology will be well processed, production and processing injection, bearing high-efficiency planetary gear reducer reducer; too loose groove-type sprocket efficient jump and wheel sprocket.The degree of tightness of the grooved sprocket is: jump from the grooved sprocket or press down, which is about 2%-3% of the original intention of the two grooved Yancheng sprocket.
, The shaft of the grooved Yancheng sprocket equipment should be hydraulic and level.In the same block effect, the end faces of the two grooved Yancheng sprocket should be positioned in the same drop. When the grooved sprocket is intended to be received within 0.5 meters, it is best to use an effective spring; the grooved sprocket is intended When the distance is more than .5 meters, it is best to use an effective spring.But it is not best to have a successful groove-type sprocket. The following is left and right, assuming the order. So if the two-wheel offset wheel sprocket efficiently displays the wheel sprocket and speeds up the planetary gear reducer reducer.When converting grooved Yancheng sprocket, many more than less than greater than less than less than over must be done well to check and count the offset of grooved Yancheng sprocket.
Previous: Sprockets for conveyor belts