Garage sprocket

Time: 2020-3-26 15:10:02 Source: Hebei Ever-Power Sprocket Factory

Garage sprocket is widely used in steelmaking, dust-free equipment, food products, style knitting, a kind of equipment transmission etc.
Inside the garage sprocket tree pole
The tooth shape of the garage sprocket The tooth shape of the garage sprocket must be protected by the friction and consolidation of the chain. The chain should be placed and put into the anastomosis carefully, and the collision and contact stress of the chain link during the anastomosis should be reduced as much as possible.
The tooth profile of the end face of the frequently used garage sprocket.The dark field microscope is composed of three arcs aa, ab, cd and four bc, and three arcs are installed-not enough tooth shape.The tooth profile is used to indicate the finished construction. It is not necessary to draw the end tooth profile on the various drawings of the garage sprocket. You only need to indicate "the tooth profile is carried out according to the 3RGB1244-85 system" on the drawing, but the shaft tooth profile of the garage sprocket should be drawn. For its style, please refer to the No Dry Construction Manual.
. Inside the garage sprocket tree pole
The sprocket of the small equipment mechanical equipment garage seems to be integral. Generally, the sprocket of the mechanical equipment garage has a spoke type. In order to carry, install and reduce the weight, holes are opened on the spokes, and the large equipment garage chain The wheel can form a grid pattern, and the ring gear and the wheel core are suitable for dye-free operation at this time! It is inconvenient to wait for the dye.
. Garage Sprocket Dyes
The garage sprocket dye should protect the gear teeth with a little bit of possibility and progress. Therefore, the overall appearance of the garage sprocket tooth surface is heat treated to meet certain needs.
Garage sprocket wiring guarantee
, The flexibility of the garage sprocket should be applied. If it is too tight, the injection will reach consumption, and the bearing will be easy to understand and break; if the garage sprocket is too loose, the surface and appearance of the garage sprocket are easy to understand.The flexibility of the garage sprocket is as follows: lifted or pressed down from the middle of the garage sprocket, about 2%-3% of the center distance between the two garage sprocket.
, The garage sprocket guarantee shaft should be shaken and complete.In the same transmission anti-corrosion, the end faces of a certain garage sprocket should only be used in the same use. When the center distance of the garage sprocket is 0.5 meters, it will be biased to millimeters; the center distance of the garage sprocket is 5 meters in front of the spring day. Mm.However, there are several current situations in which the sprocket teeth of the garage are not rubbed as much as possible, so the occurrence of the two-wheel offset is easy to understand and shows and delays the damage.When converting garage sprocket, inspection and statistics of offset garage sprocket must be completed well.

Previous: Grooved sprocket

Next: Chengdu chain sprocket