PRODUCT
- mailbox:[email protected]
Press Room
Dongguan sprocket manufacturing
Dongguan sprocket manufacturing is widely used in metallurgy, textile parts, food therapy products, charm props, a kind of parts transmission in other industries, etc.
Dongguan sprocket manufacturing tree pole was established internally
The tooth profile made by Dongguan sprocket is basically a care chain that is energy-saving and easy to join and invest in the surface, which will definitely reduce the hitting and contact stress of the chain link on the surface, but it is a simple product.
Generally speaking, Dongguan sprocket is manufactured with end tooth profile.It is also composed of three arcs aa, ab, cd and five or six anti-corrosion bc, using three arcs-anti-corrosion tooth profile.Tooth profile is used for marking tool products. There is no need to maintain the end tooth profile on the Dongguan sprocket manufacturing accident map. You only need to bookmark the "tooth profile according to 3RGB1244-85 standard water film" on the map, but it should be maintained in Dongguan sprocket manufacturing. For the tooth profile of the shaft surface, please refer to the related establishment manual for its style.
. Dongguan Sprocket Manufacturing Tree Pole
The manufacture of small round sprocket in Dongguan has become more popular, and the manufacture of ordinary round sprocket in Dongguan has become more spoken. In order to facilitate handling, installation and weight reduction, small holes in the spokes, large round Dongguan sprocket manufacturing It can become a side-by-side type, and now the ring gear and the wheel core are used together to apply different dye water film!, no rust and other dyes.
. Dongguan Sprocket Manufacturing Dyes
Dongguan sprocket manufacturing dyes should be treated with a small amount of later and exhaust gas. Therefore, the popularization of Dongguan sprocket manufacturing tooth surface is marked with heat, so that it is best to remove the strength.
Dongguan sprocket manufacturing and maintenance services
The tightness of Dongguan sprocket manufacturing should be used skillfully. Too tight will protect the precision injection, the bearing is easy to envelop the toroidal worm reducer; Dongguan sprocket manufacturing is easy to increase and stage.The degree of tightness and tightness of the Dongguan sprocket manufacturing industry is as follows: the thickness of the Dongguan sprocket manufacturing is increased or reduced, and the distance between the two Dongguan sprocket manufacturing centers is reduced by 2%-3%.
, Dongguan sprocket manufacturing construction shaft should have no surface and straightness.In the same transmission machinery, the end faces of three or four Dongguan sprockets should be in the same plane. When the pivot distance of Dongguan sprocket manufacturing is behind 0.5 meters, the deviation can often be taken; the pivot distance of Dongguan sprocket manufacturing is more than 5 meters. The point of winter can be often taken with deviations.However, it is not possible to find out the situation of the manufacturing teeth of the Dongguan sprocket. Therefore, the two-wheel offset stage is easy to see the stage and delay the envelope toroidal worm reducer.Basically, special attention was paid to patrolling and rectifying the offset of the Dongguan sprocket manufacturing during the manufacturing of the line.
Previous: Large pitch sprocket material