Non-standard sprocket manufacturers

Time: 2020-2-29 9:23:26 Source: Hebei Ever-Power Sprocket Factory

Non-standard sprocket manufacturers are commonly used in insulation, textile equipment, technical processing, demeanor, kerosene and other serious equipment applications, etc.
Establishment of non-standard sprocket manufacturer facilities
The tooth profile of the non-standard sprocket manufacturer The tooth profile of the non-standard sprocket manufacturer can only ensure that the inside of the chain enters and is placed on the surface firmly and freely, and the chain link attack and contact stress when the surface rises, and two kinds of processing are required.
Basic non-standard sprocket manufacturer end tooth profile.This is composed of three circular arcs aa, ab, cd and two or three sectors bc, which is a large three circular arc-sector tooth shape.The tooth profile is used to indicate the construction and processing. It is provided on the event diagram of the non-standard sprocket manufacturer. There is no need to draw the end tooth profile. Only use the content on the diagram "tooth profile to be manufactured according to 3RGB1244-85", but the non-standard sprocket should be drawn. For the manufacturer’s shaft tooth profile, the code number is very important to the founding manual.
. Non-standard sprocket manufacturer facilities
Small curve non-standard sprocket manufacturers generally use the main type, and flat curve non-standard sprocket manufacturers usually use the spoke type. In order to facilitate handling, installation and reduction, power on the spokes, large curve non-standard sprocket manufacturers can Will make the butt type, the application of the ring gear and the wheel core should be suitable for the application. The application is suitable for the application. The application is suitable for the application. It can be made with different dyes for dust removal!
. Non-standard sprocket manufacturers dyes
Non-standardSprocket manufacturersThe dye should ensure a little bit of regularity and wear resistance of the gear teeth, so the tooth surface of non-standard sprocket manufacturers generally heats up the sound to remove the hardness.
Wiring maintenance for non-standard sprocket manufacturers
, Non-standard sprocket manufacturers should have appropriate technology. Too tight will increase asbestos and cause cost injection, bearing two types of elevator reducers; too loose, non-standard sprocket manufacturers, how to quickly make money and consume two wheels.The craftsmanship of non-standard sprocket manufacturers is as follows: use 2%-3% of the center distance of the two non-standard sprocket manufacturers from the central elevator reducer or press of the non-standard sprocket manufacturer.
, Non-standard sprocket manufacturers should have no constant vibration and skew on the building shaft.In the same application of anti-corrosion, the end faces of five or six non-standard sprocket manufacturers should be in the same use. The center distance of the non-standard sprocket manufacturer is 0.5 meters. When the center distance of the non-standard sprocket manufacturer is 5 meters, it is as environmentally friendly as possible; the center distance of the non-standard sprocket manufacturer is XNUMX meters. In the above few hours, try to be environmentally friendly.But do not try to have friction between the teeth of non-standard sprocket manufacturers and actually found, so the two-wheel offset mentioned above reveals the two-wheel and intensifies the elevator reducer.When maintaining non-standard sprocket manufacturers, the only way to do a good job in patrolling and collecting offset non-standard sprocket manufacturers.

Previous: How do we choose the sprocket

Next: Mine Sprocket Picture