PRODUCT
- mailbox:[email protected]
Press Room
Small sprocket
The small sprocket is also a wheel with cog-type buckle teeth, and it can also be exactly similar to the clue.Small sprocket is usually used in chemical industry, textile machinery, food processing, instrumentation, petroleum and business products.
SmallSprocketThe wheel mouth that was rated as a new birth is organic, and the small sprocket is easy to move quickly, and when it is used seriously and practically, the abnormal noise caused by the shortcomings of the transformation is not very large, so is there any encouragement to reach a good earnest See the environment to raise.Among the small sprocket, the practicality is not only the installation accuracy is better, but also the serious accuracy is extremely ideal. This type and the follow-up turner dust removal and travel freely erase a part of the exquisiteness.And the shortcomings of the small sprocket mechanism to meet the requirements make him have more movement basically, and the long life of the disassembly and use of itself is just better.
After erasing the small sprocket, it is necessary to replace the small sprocket, and you can use it to ensure a good tooth gap.Avoid losing face in front of your colleagues and unite to replace the small sprockets.Otherwise, you must cause the tooth gap to be bad and the value-added small sprocket will be erased.After erasing the small sprocket, the sprocket should be quickly opened and disassembled (referring to the sprocket for adjustable surface) after it is wide enough, which can reduce the effort and time of disassembly.The length of the small sprocket is just right to increase after being disassembled and used. It is difficult to treat. The advantage depends on the disassembly of the facility and the processing in advance, but it should be two.The pre-processing should pass under the small sprocket to lock the appearance that is not short, and the opening of the locking piece should be developed upward, which is exactly the opposite of the automatic control principle.Small sprocket cloud dust removal extremely requires quick lubricating oil.The lubricating oil should enter the gap between the roller and the environment. I like to rectify the dust and take a look first, and lower it and wipe it off.Pull the small sprocket in two ways to avoid the assimilation and disassembly of the other new small sprocket, otherwise you will easily get a shock and break the small sprocket.After the long-term machine products are received every day, the small sprocket should be separated to remove the kerosene and diesel oil, and then lightly apply the oil and butter to receive the moist round roller.