PRODUCT
- mailbox:[email protected]
Press Room
Number of teeth of sprocket
The number of teeth of the sprocket is a kind of wheel with cog-type buckle teeth, which can be used to reduce noise on products that run accurately and accurately.The number of teeth of the sprocket and the wide range of use are suitable for drivers who are in the chemical industry, textile machinery, food processing, instrumentation, and petroleum in sales.
The number of teeth of the sprocket is considered by many people to be a new gear mouth product,SprocketThe number of teeth running is very fast and huge. In addition, when it is suitable for production, the noise reduction caused by the huge superiority of the rotation should be small or small, which is also conducive to achieving superior processing and viewing facilities.In addition, the number of teeth of the sprocket is suitable for special equipment. The accuracy is very great, or the processing accuracy should be extremely desirable. You have eliminated a lot of bad reactions in dealing with the subsequent M/C sweeping.Or use the sprocket to have a good sense of superiority, or it should have a good running ability, or the life of each device should be very huge.
After the damage of the number of teeth of the sprocket is the most critical, the number of teeth of the sprocket is taken and replaced to ensure superior teeth.So as not to let yourself lose face in front of colleagues, replace the number of teeth on the sprocket.Otherwise, it must be bad to shape the teeth and damage the number of teeth of the sprocket.The damage of the number of teeth of the sprocket can be used as a quick opening device (referring to the sprocket used on the adjustable surface) after sincerely, so as to prevent the length of the device.The number of teeth of the sprocket is too long at the same time or after the high-quality device is too long, there is little correction, depending on the society to remove the chain links, the most difficult is two reasons.The chain link then the number of teeth of the sprocket we walked behind, the locking plate is locked and pinned outside, and the opening of the locking plate is regarded as a general summary of the speed again.The number of teeth of the sprocket and so on is absolutely quick to add lubricating oil in the dust sweeping special class.Lubricating oil should be treated and trapped in place according to the gap, how to improve the dust-sweeping situation and prevent damage.Therefore, the number of teeth of the sprocket is in two aspects so as not to regenerate the number of teeth of the sprocket again. If it is not happy, it will cause sprints in the running and pull the number of teeth of the sprocket.When it is not stored from time to time, the number of teeth of the sprocket can be listed separately with kerosene and diesel, and then put on oil and stored in a very dry rental house.
Previous: The parameters of the sprocket of the sprocket manufacturer