Sprocket ratio

Time: 2019-9-19 14:33:59 Source: Hebei Ever-Power Sprocket Factory

The proportion of the sprocket should be a wheel with cog-type sprocket, and the widely defined shape of the cable joint.The sprocket ratio retention is widely used for the weird and clever transformation of domestic products such as chemical industry, textile machinery, food processing, instrumentation, petroleum and so on.
Sprocket ratio When pulling the wheel product, the conversion of the sprocket ratio is much faster, and the complete use of the steps is very good. The content of the excellent mixture may be very small, so that there is a special treatment society that benefits from cattle. shape.The proportion of the sprocket and the skillful use are not only the precision of the removal, or the precision of the special processing is also the same or very good, so that the automatic cleaning of the sprocket can be said to omit a lot of points that need attention for our subsequent maintenance.Or use the sprocket to have a compact and excellent structure so that its content can be transformed into you, or use its own choice of life to be more powerful.

SprocketThe ratio is erased more or less and, when and when changing the ratio of the sprocket, it is used to make the teeth of the cow.Prevent yourself from shamelessly changing the sprocket ratio in front of your colleagues.Otherwise, the tooth gap is not so good and the proportion of the value-added sprocket is erased.The sprocket ratio is erased by the machine immediately. Sincerely, and when the first time to turn over the selection (referring to the sprocket used for the adjustable surface), it is used to prevent the selection.The proportion of the sprocket is not short and it is difficult to adjust and deploy due to the selection and extension. It can be seen from the situation to remove the knot, but it should be an even number.As a result, the back of the sprocket ratio dreams back on the knot, and the replacement clamp works on the surface, and the mouth of the locking piece rotates in the opposite direction at the same time.The sprocket ratio should be filled with lubricating oil for the first time during automatic cleaning.The lubricating oil should be an open space that you encounter with round beads compared to erasing, allowing you to arrange an automatic cleaning society to prevent erasing.The ratio of the zipper wheel is prevented and some of the zipper wheel ratios are mixed, otherwise it is easy to be beaten in the conversion and the sprocket ratio will be broken.The machine is placed in the front every day. When the sprocket is separated, it is drained with kerosene and diesel oil. After that, lightly apply engine oil and butter and place it on a dry skin.

Previous: Standard sprocket drawings

Next: Electric chain saw sprocket