Description
Technical Specifications — K80A Platewheel (Stock Bore)
| 范围 | 价值 | 笔记 |
|---|---|---|
| Model | K80A | Asian Standard K Series |
| 沥青 | 25.400 mm | |
| 辊径 | 15.88 mm | |
| Tooth Width | 14.6 mm | |
| Teeth Range | Z=10–90 | |
| Hub Style | A Type (Platewheel, no hub) | Weld or bolt mounting |
| 材料 | C45碳钢 | |
| 牙齿硬度 | HRC 50–60 | 感应淬火 |
| Surface | Black oxide / machined |
主要特点
Flat Disc (No Hub) Design
Platewheel design eliminates the hub — enabling direct welding or bolting to shafts, flanges, or driven discs where standard hub sprockets would interfere with adjacent components.
⚡
Simple Mounting Flexibility
Bolt pattern or weld attachment allows the platewheel to be secured at any angular position and repositioned if the drive geometry changes — no keying or boring required.
Hardened Teeth
Induction-hardened tooth flanks (HRC 50–60) provide full wear resistance despite the thinner cross-section compared to hub-type sprockets.
Wide Tooth Range
Z=10–90 tooth counts available — enabling drive ratios from 1:1 to extreme reductions in a single platewheel product family.
Compatibility
Designed for 25.400 mm pitch roller chain (Asian standard K-series equivalent). The platewheel is supplied without a bore — it is intended for welding or bolting to your shaft or flange. Bolt-circle drilling available on request. 联系我们的团队 for custom drilling or welding preparation options.
应用程序
用户评价
Grant S. ★★★★★ 澳大利亚
“Welded K80A platewheels to our roller-conveyor drive shafts — perfect fit, clean weld preparation, and teeth aligned perfectly with our existing chain.”
K80A Z=19 Platewheel · March 2025
Mei L. ★★★★★ China
“Excellent flatness on the disc face — our welding team confirmed less than 0.2 mm run-out after welding. Good manufacturing quality.”
K80A Z=25 Platewheel · January 2025
Ben A. ★★★★☆ New Zealand
“Good product, slightly longer lead time than expected for custom tooth count but quality was worth it.”
K80A Z=30 Platewheel · February 2025
Frank B. ★★★★★ Germany
“We use these as OEM components on our conveyor modules. Consistent quality across batches of 500+ pieces.”
K80A Z=21 Platewheel · April 2025
常问问题
- Position the platewheel on the shaft stub or mounting flange; check concentricity with a dial indicator (target TIR < 0.3 mm).
- Tack-weld at 4 equidistant points before full weld run to maintain alignment.
- Complete continuous weld fillet as per drawing specification; allow to cool slowly (do not quench).
- Re-check tooth plane alignment after welding — correct if heat distortion has introduced misalignment.
- Install roller chain and set tension; re-inspect weld integrity after first 50 hours of operation.
✓ ISO 9001:2015✓ ANSI B29.1✓ ISO/DIN 8187✓ JIS B 1801✓ BS/DIN 标准✓ 英国标准
为什么选择 Ever-power Australia？
我们是一家垂直整合的制造商，拥有超过25年的链传动经验。我们的工厂占地35,000平方米，年产量超过400万个链轮。我们为澳大利亚各地的OEM合作伙伴、分销商和直接工业买家供货，产品符合GB、ISO、ANSI、JIS、DIN和BS标准。
ISO 9001认证
每年400万件以上
具备OEM能力
澳大利亚现货供应
每年400万件以上
具备OEM能力
澳大利亚现货供应
