Worm get gearbox with motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where an easy to match, high torque end result is required. Ideal for student based tasks including robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. cutting down to size. The engine is snap installed into its cradle to engage the apparatus and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little strolling robots, lifting mechanisms, and other applications where excessive torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, actually at very low voltages. We recommend that you utilize stall-detection sensors, or just see your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on the smaller threaded end of the shaft, although it is not particularly intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors arranged new criteria for reliability, efficiency and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration at this point and a really future proof answer. The Ever-Power gear engine offers total versatility in mounting options includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in choice positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
Ever-Power gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total option for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be utilized outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the result shaft of the unit.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the alternative for applications requiring a corner turn, optional dual output, or an inability for the electric motor to be back again driven. The DC right angle gear motors are designed for constant and intermittent duty procedure. Our right angle gear reducers are designed with many mounting plate options, making them perfect for a number of DC engine based applications. You can expect 12 ratios which range from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a little package size. Worm Equipment Motors are great for applications that want a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power used. On top of that, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision slice gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
Security Door Locks / Industrial Conveying Devices / Security Gates / Teeth Chair / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Items will work with you to create and manufacture a Worm Gear Engine which will optimize the performance of your unique application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm motor uses a metal gear box for toughness and a high torque output. Because of the special mechanical framework of the worm drive the engine output shaft is definitely self locking and may not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and can achieve 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially display their power in applications where large gear ratios are necessary. Our worm geared motors are therefore optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions allow simple and efficient cleaning of the get system.
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Our modular design give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its own unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to meet your needs.
Worm gear models impress with their great power density and compact design. If required, we are able to also source them with the highly effective nsd tupH surface area treatment.
As well as the basic EP housing, you can expect an extensive line of bolt-on elements to customize the merchandise including torque arms, shaft covers and output flanges. These can be easily field installed, but we will also be pleased to assemble the individual components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear products feature a even, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product preferably suited for severe and demanding industries like food processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides distinct repairing possibilities and enable an easy assembling for the client.
Other drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are made in light weight building out of aluminium die cast. Engine attachment is realised generally by way of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm no load rate, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm huge, 40mm high, a robust worm travel gearbox powered by an MM28 motor (included), most suitable for applications where a simple to fit, high torque productivity is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, ideal for student based projects including robots and buggies.
Most ideal for applications where an easy to match, high torque end result is required
Perfect for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electric, the result axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option compared to the spur gear motor. Why is worm gear so unique? Check this wiki out: Worm Travel.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs result shaft) isn’t reversible when using large reduction ratios, due to the higher friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm is used. This is normally a advantage when it’s desired to eliminate any likelihood of the result driving the input.”
In other phrases, it is hard to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm get gearbox with motor