Technical Specifications — ANSI #100 Sprocket
| Tham số |
Giá trị |
Ghi chú |
| Chain Number |
#100 |
ANSI B29.1 |
| Sân bóng đá |
1-1/4″ (31.75 mm) |
|
| Roller Diameter |
0.750″ |
|
| Tooth Width B1 |
0.681″ |
Standard hub |
| Type A (single, no hub) |
Plain disc |
For welding or bolting |
| Type B (single hub) |
Tiêu chuẩn |
Most common |
| Type C (double hub) |
Extended shaft grip |
Heavy loads |
| Vật liệu |
C45 Carbon Steel |
|
| Độ cứng của răng |
HRC 50–60 |
Induction hardened |
| Tiêu chuẩn |
ANSI B29.1 |
|
Các tính năng chính
ANSI B29.1 Compliant
Full conformance to ANSI B29.1 standard ensures interchangeability with any brand of #100 roller chain and drive components available in the Australian market.
Induction-Hardened Tooth Profile
Precision tooth-flank hardening to HRC 50–60 extends service intervals by 3× and eliminates the chain-skip failure mode that plagues soft-tooth sprockets.
Type A / B / C Hub Options
Three hub styles cover every mounting scenario — from weld-on platewheels (Type A) to deep double-hub engagement (Type C) for maximum torque transfer.
Ex-Stock Availability
Standard tooth counts stocked in Australia for same-week dispatch, minimising equipment downtime during emergency replacements.
Compatibility & Selection
Compatible with ANSI #100 roller chain to ANSI B29.1 standard (pitch 1-1/4″, roller Φ 0.750″). Also available in double-strand (#100-2) and triple-strand (#100-3) for higher power applications. Finished bore and taper bore options available — specify shaft diameter at order. Request a selection guide from our engineers.
Ứng dụng
Máy móc nông nghiệp
Harvester, planter, grain-auger and irrigation drives
Conveyor & Logistics
Roller and belt conveyor main drives
Thiết bị xây dựng
Winch, hoist and earth-moving auxiliary drives
⛏️ Mining & Heavy Industry
Robust drives on screening, crushing and transport equipment
Đánh giá của khách hàng
Rob K. ★★★★★ Australia
“Running ANSI #100 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #100 Type B Sprocket Z=21 · March 2025
Brian H. ★★★★★ USA
“Running ANSI #100 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #100 Type B Sprocket Z=25 · March 2025
Yves D. ★★★★★ Canada
“Running ANSI #100 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #100 Type B Sprocket Z=29 · March 2025
James F. ★★★★★ UK
“Running ANSI #100 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #100 Type B Sprocket Z=23 · March 2025
Câu hỏi thường gặp
► What chain does the ANSI #100 sprocket use?
The ANSI #100 sprocket uses ANSI B29.1 #100 roller chain with pitch 1-1/4″. Do not use with ISO metric chain of similar pitch without verifying roller diameter compatibility.
► What is the difference between Type A, B and C sprockets?
Type A is a plain disc (no hub) for welding or bolting. Type B has a single boss on one side. Type C has bosses on both sides for maximum shaft engagement and torque capacity.
► Are double and triple-strand versions available?
Yes. #100-2 (duplex) and #100-3 (triplex) are available for higher torque drives. Please specify strand count when ordering.
► Can you supply with a specific finished bore?
Yes. Specify your shaft diameter and keyway dimensions at order. Standard lead time for finished bore is 5–7 days.
► Do you stock these in Australia?
Selected tooth counts are stocked locally for 2–5 day delivery. Contact our sales team to confirm stock availability for your specific requirement.
- Match bore to shaft diameter (H7/k6 tolerance recommended for press-fit applications).
- Position sprocket on shaft; secure keyway and set-screw per hub marking torque spec.
- Align with driven sprocket using a straight-edge across tooth faces within 0.5 mm.
- Thread ANSI #100 roller chain; close with a half-link or connecting link and orientate the open end away from the direction of travel.
- Set sag on slack strand to 2–3% of centre distance; recheck after 4 hours of loaded operation.
✓ ISO 9001:2015✓ ANSI B29.1✓ ISO/DIN 8187✓ Tiêu chuẩn JIS B 1801✓ Tiêu chuẩn BS/DIN✓ Tiêu chuẩn GB
Tại sao nên chọn Everpower Australia?
Chúng tôi là nhà sản xuất tích hợp theo chiều dọc với hơn 25 năm kinh nghiệm trong lĩnh vực truyền động xích. Nhà máy của chúng tôi rộng 35.000 m² và sản xuất hơn 4 triệu bánh răng mỗi năm. Chúng tôi cung cấp cho các đối tác OEM, nhà phân phối và người mua công nghiệp trực tiếp trên khắp nước Úc, với các sản phẩm đáp ứng các tiêu chuẩn GB, ISO, ANSI, JIS, DIN và BS.
Đạt chứng nhận ISO 9001
Hơn 4 triệu chiếc/năm
Có khả năng OEM
Hàng có sẵn tại Úc
Sẵn sàng đặt hàng? Nhận báo giá miễn phí ngay hôm nay!
Đội ngũ kỹ sư của chúng tôi luôn sẵn sàng 24/7 để hỗ trợ các doanh nghiệp Úc về thông số kỹ thuật, thiết kế tùy chỉnh và giá bán sỉ.
📩 Yêu cầu báo giá
🔍 Xem tất cả sản phẩm
