Double-Pitch Sprocket NK2080SB / NK2100SB

Double-Pitch Sprocket NK2080SB / NK2100SB

Cái NK2080SB / NK2100SB double-pitch sprocket (pitch 50.8 / 63.5 mm) is purpose-engineered for slow-speed conveyor and material-handling chains (C2080 / C2100 series). Its double-pitch design reduces component count and costs in long-centre conveyor runs, with C45 steel construction, hardened tooth flanks (HRC 50–60), and stock bore design for quick shaft mounting across Z=6½ – 12½ tooth counts.

Mã sản phẩm: e9de437a6d09 Loại: , , Nhãn: , , ,

Sự miêu tả

NK2080SB / NK2100SB Double Pitch Sprocket

Technical Specifications — NK2080SB / NK2100SB Double-Pitch Sprocket

Tham số Giá trị Ghi chú
Chain Series C2080 / C2100 Double-pitch conveyor chain
Sân bóng đá 50.8 / 63.5 mm Double of ANSI standard
Tooth Range Z=6½ – 12½
Kiểu trung tâm Stock Bore (B Type) Finished bore on request
Vật liệu C45 Carbon Steel
Độ cứng của răng HRC 50–60 Induction hardened
Bề mặt Black Oxide / Zinc Plated
Tiêu chuẩn ANSI B29.1 (double-pitch)

Features & Advantages

1
Reduced Component Count
Double-pitch design allows twice the pitch between links — fewer sprockets and chain joints per metre of conveyor, lowering total drive cost by up to 30%.
2
Hardened for Conveyor Demands
Induction-hardened tooth flanks to HRC 50–60 resist the abrasive wear patterns typical of slow-speed, high-load conveyor applications.
3
⚖️ Lower Weight, Same Pitch Circle
Compared to equivalent standard-pitch sprockets, double-pitch variants are lighter, reducing rotational inertia and bearing loads in start-stop conveyor cycles.
4
Stock Bore for Quick Fit
Standard stock bore machined to drawing allows rapid installation on common shaft diameters — critical for minimising conveyor downtime in logistics and food processing facilities.

Ứng dụng

Conveyor Systems

Conveyor Systems
Long-centre flat-top and slat conveyors in warehousing and distribution centres
Food Processing Lines

Food Processing Lines
Accumulation conveyors, tunnel washer drives, and cooling conveyors
Packaging & Logistics

Packaging & Logistics
Sortation, accumulation, and indexing conveyor drives
Agricultural Handling

Agricultural Handling
Grain elevator legs, cleaner conveyor drives, and bin-fill systems

Đánh giá của khách hàng

Greg H.  ★★★★★ Australia
“Replaced worn double-pitch sprockets on our carton conveyor with NK2080SB / NK2100SB — installation was straightforward and the conveyor runs quieter than before.”
NK2080SB / NK2100SB Z=9 · March 2025
Lars S.  ★★★★★ Sweden
“Good dimensional accuracy on the double-pitch tooth profile. Chain engagement is smooth with no clicking or vibration.”
NK2080SB / NK2100SB Z=12 · January 2025
Roberto G.  ★★★★☆ Italy
“Solid product. Delivery was slightly delayed but quality was worth the wait. Will use again.”
NK2080SB / NK2100SB Z=10 · February 2025
Wei C.  ★★★★★ China
“We use these on our logistics conveyor systems — consistent quality across repeated orders, excellent supplier.”
NK2080SB / NK2100SB Z=8 · April 2025

Câu hỏi thường gặp

►  Can I use a double-pitch sprocket with a standard single-pitch chain?
No. Double-pitch sprockets are designed exclusively for double-pitch conveyor chain. Using standard single-pitch chain on a double-pitch sprocket will cause incorrect meshing, rapid wear, and potential chain derailment.
►  What is the difference between RB and SB suffix?
RB indicates round-barrel rollers (standard for conveyor chain). SB indicates small-barrel (slimmer roller profile). The chain and sprocket suffix must match.
►  Are finished bore versions available?
Yes. Specify shaft diameter and keyway at order. Standard lead time for finished bore double-pitch sprockets is 5–7 days.
►  What is the maximum shaft speed for double-pitch sprockets?
Double-pitch sprockets are optimised for slow speeds (typically 10–60 m/min chain speed). For high-speed drives, use standard single-pitch chain instead.
►  Are stainless steel double-pitch sprockets available?
Yes, SS304 double-pitch sprockets are available for food-grade conveyor applications. Contact us for lead time and pricing.
  1. Verify shaft diameter against stock bore dimension; machine finished bore if required.
  2. Position sprocket on shaft and align with the opposing end of the conveyor run using a laser or wire-line method.
  3. Install double-pitch conveyor chain; set tension with 1–2% sag on the return strand.
  4. Operate the conveyor at slow speed before full-load; check for chain-to-sprocket tracking alignment.
✓ ISO 9001:2015✓ ANSI B29.1✓ ISO/DIN 8187✓ Tiêu chuẩn JIS B 1801✓ Tiêu chuẩn BS/DIN✓ Tiêu chuẩn GB
Nhà máy Ever-power

Tại sao nên chọn Everpower Australia?

Chúng tôi là nhà sản xuất tích hợp theo chiều dọc với hơn 25 năm kinh nghiệm trong lĩnh vực truyền động xích. Nhà máy của chúng tôi rộng 35.000 m² và sản xuất hơn 4 triệu bánh răng mỗi năm. Chúng tôi cung cấp cho các đối tác OEM, nhà phân phối và người mua công nghiệp trực tiếp trên khắp nước Úc, với các sản phẩm đáp ứng các tiêu chuẩn GB, ISO, ANSI, JIS, DIN và BS.

Đạt chứng nhận ISO 9001
Hơn 4 triệu chiếc/năm
Có khả năng OEM
Hàng có sẵn tại Úc

Sẵn sàng đặt hàng? Nhận báo giá miễn phí ngay hôm nay!

Đội ngũ kỹ sư của chúng tôi luôn sẵn sàng 24/7 để hỗ trợ các doanh nghiệp Úc về thông số kỹ thuật, thiết kế tùy chỉnh và giá bán sỉ.

📩 Yêu cầu báo giá
 
🔍 Xem tất cả sản phẩm

Sản phẩm liên quan