January 20, 2021

Basic Description
Equiped using a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves and a tank, this power unit can drive a double acting cylinder to extend and retract without a directional solenoid valve. It is normally utilized in recre-ational motor vehicles, pleasure boats and portable phases, and so forth.
Unique Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic parts concerned in advance of installation of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is encouraged.
4. The electrical power unit proven is created to be mounted horizontally.
five. Oil changing is required immediately after the preliminary one hundred operation hours, afterwards once each and every 3000 hrs.
6. Check the oil degree from the tank just after the first running in the energy unit.