Stainless Steel ISO 08B-1 Sprocket (SS304)

Stainless Steel ISO 08B-1 Sprocket (SS304)

그만큼 Stainless Steel ISO 08B-1 sprocket (1/2″×5/16″) in AISI 304 (SUS304) stainless steel delivers full corrosion resistance for food processing, pharmaceutical, marine, and chemical environment applications. Precision-hobbed to ISO 606 / DIN 8187 standards, it eliminates rust-contamination risk, withstands frequent high-pressure washdowns, and maintains dimensional accuracy throughout its extended service life.

제품 코드: 34ca0d43aedf 범주: , , 꼬리표: , , ,

설명

Stainless Steel 08B Sprocket

Technical Specifications — SS304 ISO 08B-1 Sprocket

매개변수 값 메모
Chain ISO 08B-1 (DIN 8187)
정점 1/2″×5/16″
재료 AISI 304 / SUS304 1.4301 equiv.
Chromium Content 18–20%
Nickel Content 8–10.5%
Carbon Content ≤0.08%
Tensile Strength ≥515 MPa
Surface Finish Polished (Ra 0.8–1.6) / Plain
Operating Temp. –196 to +800°C Non-hardened
치아 범위 Z=12 – Z=30 (stock, ext. on request)
Standard ISO 606 / DIN 8187

주요 특징

✨
Full SS304 Corrosion Resistance
18% chromium / 8% nickel austenitic stainless eliminates rust risk in wet, chlorinated, or acidic processing environments — no surface coating that can chip or peel.
Food-Safe Material
AISI 304 stainless is approved for direct food contact by FDA, EU 10/2011, and Australian FSANZ standards. Safe for CIP (clean-in-place) chemical sanitation protocols.
High-Pressure Washdown Rated
Withstands daily high-pressure (up to 100 bar) hot-water washdowns without dimensional change, corrosion, or surface degradation.
️
Wide Temperature Range
Maintains structural integrity and dimensional accuracy from cryogenic (–196°C) to 400°C operating temperatures — suitable for freezing tunnels and cooking equipment.

응용 프로그램

식품 가공

식품 가공
Conveyor and portioning machine drives in meat, dairy, bakery, and beverage lines
Pharmaceutical Packaging

Pharmaceutical Packaging
Blister-pack, tablet-press, and sterilization equipment drives
Marine & Offshore

⚓ Marine & Offshore
Deck machinery, winch drives, and subsea equipment in salt-spray environments
Chemical Processing

⚗️ Chemical Processing
Drives in chemical reactors, mixers, and solvent-handling conveyors

고객 리뷰

“SS304 08B sprockets have been running on our meat-processing conveyor for 14 months without a single rust spot. The previous carbon-steel sprockets corroded within 3 weeks.”
— Anna F. ( Australia) · ★★★★★ · April 2025
SS304 ISO 08B-1 Z=19
“Perfect for our dairy bottling line. Withstands our 80°C caustic wash without any sign of pitting or surface change.”
— Sophie B. ( France) · ★★★★★ · February 2025
SS304 ISO 08B-1 Z=21
“Excellent finish quality. Slightly longer delivery than standard carbon-steel versions but worth the wait for stainless applications.”
— Taro N. ( Japan) · ★★★★☆ · January 2025
SS304 ISO 08B-1 Z=17
“We supply these to our pharmaceutical clients who require material certificates. Certificates supplied promptly with each order.”
— Klaus R. ( Germany) · ★★★★★ · March 2025
SS304 ISO 08B-1 Z=25

자주 묻는 질문

►  Is SS304 suitable for all food processing environments?
SS304 is suitable for most food processing applications. However, for high-chloride environments (brine, seawater, or hypochlorite sanitisers above 200 ppm), consider SS316 (available on request), which offers superior chloride pitting resistance.
►  Can you supply material test certificates (MTCs)?
Yes. Material test certificates (EN 10204 3.1 or 2.2) confirming chemical composition and mechanical properties are available with each order on request.
►  Do stainless sprockets require lubrication?
Yes. While SS304 is corrosion-resistant, the chain itself still requires lubrication to prevent fretting wear. Use NSF H1 approved food-grade chain lubricant for food contact zones.
►  Is the tooth hardness lower than carbon-steel sprockets?
Yes. SS304 cannot be induction-hardened to the same level as C45. Tooth hardness is approximately HRB 90–96 (HRC 18–22 equiv.). For heavy-load applications requiring high tooth hardness, consider C45 with dacromet coating or SS316L hardfaced option.
►  What is the minimum order for custom tooth counts?
MOQ for custom stainless tooth counts is 10 pieces. Lead time is typically 3–4 weeks for non-stock sizes.
  1. Clean all contact surfaces; avoid carbon-steel tools that may embed iron particles and cause surface rust.
  2. Use stainless fasteners (A2 or A4 grade) to avoid galvanic corrosion at fastener points.
  3. Align sprockets; install stainless or SS-compatible roller chain.
  4. Lubricate with NSF H1 food-grade chain oil before initial start-up.
  5. Inspect for any chain elongation or tooth wear every 500 hours; replace chain before sprocket shows hook-tooth wear profile.
✓ ISO 9001:2015✓ ANSI B29.1✓ ISO/DIN 8187✓ JIS B 1801✓ BS/DIN 표준✓ 영국 표준
에버파워 공장

Everpower Australia를 선택해야 하는 이유는 무엇일까요?

당사는 25년 이상의 체인 구동 장치 제조 경험을 보유한 수직 통합형 제조업체입니다. 35,000m² 규모의 생산 시설에서 연간 4백만 개 이상의 스프로킷을 생산하고 있습니다. GB, ISO, ANSI, JIS, DIN 및 BS 표준을 충족하는 제품을 호주 전역의 OEM 파트너, 유통업체 및 직접 산업 구매자에게 공급하고 있습니다.

ISO 9001 인증 획득
연간 400만 개 이상
OEM 가능
호주 재고 있음

주문할 준비 되셨나요? 지금 바로 무료 견적을 받아보세요.

저희 엔지니어링 팀은 호주 기업들을 위해 사양, 맞춤 설계 및 대량 구매 가격 책정에 대한 지원을 연중무휴 24시간 제공합니다.

📩 견적 요청하기
 
🔍 모든 제품 보기

관련 상품