{"id":672,"date":"2020-02-25T06:10:41","date_gmt":"2020-02-25T06:10:41","guid":{"rendered":"http:\/\/wheelsprocket.xyz\/?p=672"},"modified":"2020-02-25T06:10:41","modified_gmt":"2020-02-25T06:10:41","slug":"helical-speed-reducer","status":"publish","type":"post","link":"https:\/\/wheelsprocket.xyz\/ja\/%e5%bf%9c%e7%94%a8\/helical-speed-reducer\/","title":{"rendered":"helical speed reducer"},"content":{"rendered":"

\u201cEP series\u201d inline helical equipment reducers include a HP selection of \u00bc-100 HP, 37-147 mm box sizes, 2:1-120:1 speed ratios and a cast iron casing for unquestioned strength and reliability. Provided in a number of NEMA C-encounter quill style motor input flange configurations, the \u201cEP\u201d series enables users to quickly locate off-the-shelf NEMA motors instead of custom gear motors with special initial pinion gears. EP\u2019s bolt hole pattern, base to center line height, result shaft diameter and usable shaft size match the \u201cR\u201d group of the inline market innovator producing plant retrofitting a breeze.
Product Features
2:1 – 120:1 ratios (other ratios offered as custom orders)
Box sizes 37 – 147
Built for high performance, high power, and low noise
All cast iron housings for unquestioned strength and reliability
Wide variety of ratios from 2:1 to 120:1
Horsepower range between 1\/4 HP to 100 HP
Gears are precision surface for better rotation and quieter operation
Gearbox flanges are made to accept NEMA C-Face electrical motors
Drop-in for most major European-produced Inline reducer brands
2-year warranty
The precision planetary gear units of the EP series with ground helical gearing and preloaded double taper roller bearings guarantee low-noise synchronism because of their immense load transporting capacity and rigidity even under high load conditions. The one-piece planet carrier and the built-in needle roller bearings allow the transmission of high torques. The additional shaft sealing band ensures maximum protection against dirt and splash water in accordance with protection class IP65.
Design
The selection of an appropriate planetary gear for your
individual application.
Short delivery time
Small quantities on short notice. Delivery
time for larger quantities or special requests has to be
checked individually
CAD drawings
Drawings for all series can be found on request
Flexibility
For customized solutions we draw from a sizable range of
single components. Based on demand they might be
combined for you in a flexible way
EP isn’t just known because of its comprehensive manufacturing
expertise. Our clients also revere us as skilled partners in
drive technology. This expertise is the base of our planetary gear
series.
We place great importance on your versatility in the configuration and
program of our planetary gears. Being faithful to our motto customer
satisfaction is always important.
Quality
Our top quality standards apply to almost all our planetary gearbox series.
Included in these are especially high gearing quality, low backlash and long
service life.
Innovation
Fast response to customer requests and continuous further development of our planetary gears is definitely our driving force.
Close grained cast iron casing and flanges
Hardened steel helical gearing for extended life
Anti-friction bearings
Double lip seals protect from oil leakage
Optional steel bolt-on base
Double bearing design on input and output shaft
EP Gear’s 800 Series contains a focused collection of compact, heavy duty helical gear drives that provide long-life performance and simplified maintenance. A wide selection of reduction ratios suit a straight broader range of specifications, while a number of input shaft configurations maximize flexibility. In addition, the amount of products that complement this series of equipment drives make it an ideal choice for today’s industrial distributor.
The 800 Series offers a functional interchange for ep and other European producers’ helical gear drives,making it uniquely practical for alternative applications.
Four basic sizes 1\/6 – 10 HP
Over 40 different ratios 1.5:1 – 71:1 double-reduction ratios 36:1 – 250:1 triple-reduction ratios
Non-flanged and NEMA c-face input styles
Base-mount and output flange-mount models available
Output-shaft diameters from 3\/4″ to at least one 1 5\/8″
The typical NEMA C-face design encourage any standard NEMA engine, making it exceptionally versatile.
Ratios up to 70:1 in just two phases means increased effectiveness and reduced case size.
Available oil seals simplify schedule product maintenance.
All units can be double sealed on both the input and output to withstand the rigors of actually the most demanding applications.
800 Series drives come pre-filled with synthetic lubrication for your unique mounting position.
Sizes 3 and 4 are lubricated forever which promotes trouble-free operation.
Washdown duty products in white-colored or stainless epoxy coatings make these gear drives ideal for the most severe Washdown.
Right angle bevel speed reducers decrease speed and increase torque from the driver end to the driven result in a drive system. They have got a beveled gear which allows the reducer to rotate in both directions and operate with low sound and vibration. They are typically made out of durable, corrosion-resistant components like stainless steel.
Features
Wide range of accessories and non-standard designs
Single piece casing with high structural stiffness
Benefits
Easy and functional shaft-mounting design
Minimum maintenance requirements
High, reliable and tested performance
Suitable for the heaviest duties
This economical aluminum body helical speed reducer<\/a> provides highly reliable power transmission for general purpose applications. These gearboxes offer cost effective operation and superior overall performance over similar products.
5 sizes with aluminum housings
Torque capacity from 200-6000 inlbs
Ratios from 2.5:1 to 600:1
Output shafts in ” or metric dimensions
Insight adapters for NEMA and IEC motors
Mounting via foot, face or bolt-on flange
The exclusive utilization of the involute helicoid thread form on the worm and gear offers high efficiencies and long service lifestyle on draglines and shovels. The hardened,ground and polished alloy metal worm develops a smooth, work hardened surface area on the bronze gear. For this reason, the worm gears wear in and improve with extented service while other gears are deteriorating.
Hardened, shaved or floor helical gears
Hollow & solid output shafts
Vertical & horizontal mountings
Fan cooled (standard)
Motor mounts
Cast iron or steel housings available<\/p>","protected":false},"excerpt":{"rendered":"

\u201cEP series\u201d inline helical equipment reducers include a HP selection of \u00bc-100 HP, 37-147 mm box sizes, 2:1-120:1 speed ratios and a cast iron casing for unquestioned strength and reliability. Provided in a number of NEMA C-encounter quill style motor input flange configurations, the \u201cEP\u201d series enables users to quickly locate off-the-shelf NEMA motors instead of custom gear motors with special initial pinion gears. EP\u2019s bolt hole pattern, base to center line height, result shaft diameter and usable shaft size match the \u201cR\u201d group of the inline market innovator producing plant retrofitting a breeze.Product Features2:1 – 120:1 ratios (other ratios offered as custom orders)Box sizes 37 – 147Built for high […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":true,"template":"","format":"status","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-672","post","type-post","status-publish","format-status","hentry","category-uncategorized","post_format-post-format-status"],"_links":{"self":[{"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/posts\/672","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/comments?post=672"}],"version-history":[{"count":1,"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/posts\/672\/revisions"}],"predecessor-version":[{"id":673,"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/posts\/672\/revisions\/673"}],"wp:attachment":[{"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/media?parent=672"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/categories?post=672"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wheelsprocket.xyz\/ja\/wp-json\/wp\/v2\/tags?post=672"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}