Technical Specifications — ANSI #35 Sprocket
| المعلمة |
قيمة |
ملحوظات |
| Chain Number |
#35 |
ANSI B29.1 |
| يقذف |
3/8″ (9.525 mm) |
|
| Roller Diameter |
0.200″ |
|
| Tooth Width B1 |
0.168″ |
Standard hub |
| Type A (single, no hub) |
Plain disc |
For welding or bolting |
| Type B (single hub) |
معيار |
Most common |
| Type C (double hub) |
Extended shaft grip |
Heavy loads |
| مادة |
فولاذ كربوني C45 |
|
| صلابة الأسنان |
HRC 50–60 |
مُقسّى بالحث |
| معيار |
ANSI B29.1 |
|
Key Features
ANSI B29.1 Compliant
Full conformance to ANSI B29.1 standard ensures interchangeability with any brand of #35 roller chain and drive components available in the Australian market.
Induction-Hardened Tooth Profile
Precision tooth-flank hardening to HRC 50–60 extends service intervals by 3× and eliminates the chain-skip failure mode that plagues soft-tooth sprockets.
Type A / B / C Hub Options
Three hub styles cover every mounting scenario — from weld-on platewheels (Type A) to deep double-hub engagement (Type C) for maximum torque transfer.
Ex-Stock Availability
Standard tooth counts stocked in Australia for same-week dispatch, minimising equipment downtime during emergency replacements.
Compatibility & Selection
Compatible with ANSI #35 roller chain to ANSI B29.1 standard (pitch 3/8″, roller Φ 0.200″). Also available in double-strand (#35-2) and triple-strand (#35-3) for higher power applications. Finished bore and taper bore options available — specify shaft diameter at order. Request a selection guide from our engineers.
التطبيقات
Agricultural Machinery
Harvester, planter, grain-auger and irrigation drives
Conveyor & Logistics
Roller and belt conveyor main drives
Construction Equipment
Winch, hoist and earth-moving auxiliary drives
⛏️ Mining & Heavy Industry
Robust drives on screening, crushing and transport equipment
آراء العملاء
Rob K. ★★★★★ أستراليا
“Running ANSI #35 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #35 Type B Sprocket Z=24 · March 2025
Brian H. ★★★★★ USA
“Running ANSI #35 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #35 Type B Sprocket Z=31 · March 2025
Yves D. ★★★★★ Canada
“Running ANSI #35 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #35 Type B Sprocket Z=21 · March 2025
James F. ★★★★★ UK
“Running ANSI #35 sprockets from Ever-power for over a year on our main conveyor drive — zero failures, zero adjustment needed after initial run-in.”
ANSI #35 Type B Sprocket Z=20 · March 2025
التعليمات
► What chain does the ANSI #35 sprocket use?
The ANSI #35 sprocket uses ANSI B29.1 #35 roller chain with pitch 3/8″. Do not use with ISO metric chain of similar pitch without verifying roller diameter compatibility.
► What is the difference between Type A, B and C sprockets?
Type A is a plain disc (no hub) for welding or bolting. Type B has a single boss on one side. Type C has bosses on both sides for maximum shaft engagement and torque capacity.
► Are double and triple-strand versions available?
Yes. #35-2 (duplex) and #35-3 (triplex) are available for higher torque drives. Please specify strand count when ordering.
► Can you supply with a specific finished bore?
Yes. Specify your shaft diameter and keyway dimensions at order. Standard lead time for finished bore is 5–7 days.
► Do you stock these in Australia?
Selected tooth counts are stocked locally for 2–5 day delivery. Contact our sales team to confirm stock availability for your specific requirement.
- Match bore to shaft diameter (H7/k6 tolerance recommended for press-fit applications).
- Position sprocket on shaft; secure keyway and set-screw per hub marking torque spec.
- Align with driven sprocket using a straight-edge across tooth faces within 0.5 mm.
- Thread ANSI #35 roller chain; close with a half-link or connecting link and orientate the open end away from the direction of travel.
- Set sag on slack strand to 2–3% of centre distance; recheck after 4 hours of loaded operation.
✓ ISO 9001:2015✓ ANSI B29.1✓ ISO/DIN 8187✓ JIS B 1801✓ معايير BS/DIN✓ معايير بريطانيا العظمى
لماذا تختار شركة إيفر باور أستراليا؟
نحن شركة تصنيع متكاملة رأسياً، نمتلك خبرة تزيد عن 25 عاماً في مجال أنظمة نقل الحركة بالسلاسل. يمتد مصنعنا على مساحة 35,000 متر مربع، وينتج أكثر من 4 ملايين ترس سنوياً. نوفر منتجاتنا لشركاء تصنيع المعدات الأصلية والموزعين والمشترين الصناعيين المباشرين في جميع أنحاء أستراليا، وهي مطابقة لمعايير GB وISO وANSI وJIS وDIN وBS.
حاصل على شهادة ISO 9001
أكثر من 4 ملايين قطعة/سنة
قادر على تصنيع المعدات الأصلية
متوفر في أستراليا
هل أنت مستعد للطلب؟ احصل على عرض سعر مجاني اليوم
يتوفر فريقنا الهندسي على مدار الساعة طوال أيام الأسبوع للمساعدة في المواصفات والتصميمات المخصصة وتسعير الكميات للشركات الأسترالية.
📩 اطلب عرض سعر
🔍 تصفح جميع المنتجات
