Sprocket fixed axially

Time: 2021-6-1 17:42:30 Source: Hebei Ever-Power Sprocket Factory

The axial fixation of the sprocket is normally used in chemical industry, textile facilities, food and beverage, wind instrument equipment, mechanical equipment, sprocket and other household facilities.
The sprocket is axially fixed inside the tree for construction
The axially fixed toothed sprocket sprocket only protects the chain, which is cheap and turbulent to participate in and inject into the surface. The protection and isolation stress of the chain link when the surface is low is also easy to understand.
The popular sprocket axially fixes the tooth profile of the end face.It is also composed of three arcs aa, ab, cd and five influences bc, referred to as three arcs-influence tooth profile.The tooth profile is carried out according to the standard. In addition, there is no need to use the cheap and good end tooth profile on the sprocket axial fixed service map. You only need to indicate on the map "the tooth profile is in accordance with 3RGB1244-85 to indicate the water film", but it should be cheap. For the gear shape of the axially fixed shaft surface of the sprocket, please refer to the construction manual for its size.
. The sprocket is axially fixed inside the tree
Axial fixation of small trapezoidal sprocket generally results in a whole part, and the axial fixation of medium trapezoidal sprocket is mostly a spoke type, which can be transported, installed and reduced in weight. Outside the spokes, the axial fixation of large trapezoidal sprocket can cause a net pattern. , Now that the gear ring and the wheel core are appropriate, it is not a material water film! It is not equipped with other materials.
. Sprocket axial fixing material
The sprocket axial fixing material should protect the gear teeth with rich mesh and wear resistance. Therefore, the sprocket axial fixing tooth surface is generally thermally solved to make it the best to develop the hardness and strength.
The sprocket axially fixes the line to each other
, The running degree of the sprocket axially fixed should be used in combination. Too tight will increase the economy. The bearing is simply damaged; the sprocket is too loose to fix the bearing and offset in the axial direction.The running height of the axially fixed sprocket is as follows: the axially fixed method from the sprocket is simple or depressed to produce 2%-3% of the axially fixed core distance of the two sprocket.
, The sprocket is axially fixed on the safety shaft, and there should be constant vibration and satisfaction.In the same accurate component, the axially fixed end faces of some sprocket should be on the same net. When the axial fixed core distance of the sprocket is below 0.5 meters, try to connect with errors; the axial fixed core distance of the sprocket is more than .5 meters. At the stage, try your best to connect with errors.But not trying to fix the sides of the teeth along the axis of the sprocket, so the offset of the two wheels by millimeters simply causes offset and lift damage.When the mutual sprocket is axially fixed, only the patrol sentry and the arrangement of the offset sprocket are axially fixed.

Previous: Shaanxi sprocket manufacturers price

Next: Hebei sprocket manufacturers use