3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for any servo motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next era cycloidal quickness reducer. It utilizes 52100 grade bearing metal on most of its speed reduction components. It is offered with a complete two year guarantee, not tied to hours of procedure, and can endure abuse that could break the teeth of ordinary rate reducers.
The EP 3000, easily available with inputs for both servo and induction motors, features a compact design with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Offered in two backlash rankings and multiple mounting choices, the EP 3000 includes a design hard enough for both servo and standard induction engine applications. The unique two piece pin casing design guarantees result shaft backlash rankings of less than 6 arc-min.
The EP offers a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows a credit card applicatoin to attain negligible backlash, maintain remarkable rigidity, and increase control stability to ensure that the desired output motion can be easily achieved. The look is truly a distinctive concept, utilizing a full get in touch with screw-like transmission for high performance and elimination of wear. The unit provides optimum compactness using orthogonal axes and includes a huge hollow shaft for versatility.
WORM SERVO GEAR REDUCER
Wide range of servo gearboxes, made to fit almost all servo motors found on the market
Designed for the highest torsional stiffness and the lowest angular backlash, pertaining to the utmost torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and non-standard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical systems) Catalog SR
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the expansion of our selection of Servo Reducers, at this point offering five degrees of precision to meet up any app requirements. The five degrees of precision offered allows a machine developer to select the required reducer precision to meet up their requirements and their spending budget. They can be purchased in both in-series and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Typical applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, Electronic and B versions are identical, making it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of electric motor couplings and installation flanges are available for the entire reducer range to install virtually any servo engine and the hollow bore output can be utilized to mount output shafts, pinion shafts, or other drive elements.
These reducers are usually selected based on the peak cycle forces, which usually happen during accelerations and decelerations. These cycle forces rely on the powered load, the speed vs. period profile for the routine, and any other exterior forces acting on the axis. For more selection details, please follow this PDF link.
For application & selection assistance, please call, fax or email us. Your application information will be reviewed by our engineers, who will recommend the very best solution for the application.
EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular design permits configurations with motor input flange and result pinion for rack and pinion drives, as well as solid result shafts, Hollow bore output, and input shafts for all the positioning applications. The modular style allows for universal installation of the gearbox in any orientation.
They can be used on motors with a NEMA23 standard flange through an adaptor kit. As the gears are naturally angled, they lead to a short total amount of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be constructed on the gear’s output side.
Built with a simple and robust design, the series has gearing ratios that range between 6:1 to 75:1. The user can also customize the components through the order, so as to match the gear to its intended application.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models likewise incorporate versions with double shaft, right angle shaft and right position output, in addition to a full range of adapters for engine mounting, making them with the capacity of meeting the requirements of also the most diverse applications. They are made for make use of with built-in servo and stepper EP motors, mounted directly or via adaptor flanges, but can also be used with other EP engine types. This range of products is founded on years of experience and represents the outcome of a decade-long analysis targeted at improving performance.
Optimum precision and dynamics, coupled with outstanding torque density, will be the key requirements specific for reliable servo gearboxes used. EP offers servo gearboxes for just about any program and any functionality range. Our low-backlash planetary and right-angle gearboxes reflect our enthusiasm for creativity and the best levels of precision.
Worm equipment reducers provide market advance solution with effectiveness and flexibility. Low quantity of basic models can be applied to a wide variety of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical devices. When the motor speed needs to be reduced, the output torque raises and send torque completely to the application. We believe that clients will appreciate our gear reducer to attain their demand. Just check out EP, you may get more information about servo gearheads, servo gearboxes, and equipment reducers. We always keep going forward for your support.
Plug the Acceleration Reducer in to the desired channel of your receiver, and plug the lead from your servo (or servo wye) in to the man servo lead from the circuit plank. The arranged screw on the blue trim pot, located near the top of the main circuit board, is used to control the velocity of the servo. Switch the set screw fully clockwise (CW) for normal servo speed with no speed reduction, completely counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial rate reduction. The crimson LED indicates three feasible conditions: Slower Blinking = No Transmission; Solid On = No Velocity Decrease; Fast Blinking = Reduced Quickness Setting
Please note that if you make any alter to the speed environment while the receiver is on, you need to cycle capacity to the receiver (switch if off and back again on) for the new speed setting to take impact. This circuit may also be utilized in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in opposite directions for right function. Guidelines are included for easy installation and use.
IMPORTANT NOTE: This device will only work on a normal, proportional servo. You won’t focus on a retract-type servo, because they do not recognize any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, also by a transmitter which includes this function, as their style and electronics do not allow it. Examine the FAQ page to learn more.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a far more scale-like movement of flaps or retracts. Adjustable, it can be set to lessen the quickness of your servo from super-slow motion to no speed decrease at all, with an almost infinite amount of positions in between. Maximum reduction period for a servo to travel 90 degrees is approximately 14 seconds, minimum period (no reduction) is merely the normal speed of the servo. Ideal for reducing or eliminating the inclination of a plane to “balloon up” when flaps are deployed. It can be used to control more than one servo by use of a regular servo Y.
This is actually the new regulated version that can be utilized on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Lifestyle batteries. This unit won’t reduce the voltage going to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging devices, gantries, injection molding machines, pick and place, and linear slides.Offered in concentric shaft, right position solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to quickly mount to any kind of manufacturer’s servo engine. The EP Series helical gears have got slanted teeth in comparison to spur gears with straight cut teeth, creating a smoother equipment mesh, yielding considerably lower noise levels.
The reduced backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance components.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units are available in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 result, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway
You could find out more information about servo gear reducer on our website.