Materials Dealing with Energy UNIT 2
Standard Description
This power unit features electrical power up gravity down circuit. Activate the commence solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve with all the decreasing speed controlled through the stress compensated flow handle valve. Products of this series can be extensively used in the sector of logistic gadgets including fork lift, mini lift table, and so forth.
Particular Notes
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic elements concerned before mounting the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which must also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil changing is needed right after the initial 100 operation hrs,afterwards once every 3000 hours.
5. The electrical power unit need to be mounted horizontally.

Materials Managing Electrical power UNIT 1
Basic Description
This electrical power unit is developed to the fork lift sector, consisting of really productive gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down motion are controlled by the lever with the guide release valve, that is outfitted with an electrical switch to activate the motor. The lowing speed is controlled through the strain compensated flow manage valve.
Special Notes
1. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned ahead of installation of the electrical power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
four. Oil altering is required following the preliminary a hundred operation hours, afterwards as soon as each 3000 hours.
five. The electrical power unit shown is made to be mounted horizontally.