February 19, 2021

Elastomers In Compression
We provides four styles of elastomer styles to allow for additional flexibility in addressing certain application requirements. One piece models are utilized in the “L” and “AL” models (known as spiders) and many part “load cushions” are utilized in the “C” and “H” model couplings. The load cushions are in sets of 6 to 14 pieces determined by coupling dimension.
Strong Center Spider
The solid center design is usually employed style when shafts with the driver and driven equipment might be stored separate by a common gap
Open Center Spider
The open center style and design will allow for the shafts on the driver and driven for being positioned inside of a short distance
Open center spiders give shaft positioning versatility but possess a lower RPM capability
Made use of solely to the C and H Kind couplings
Load cushions are held in location radially by a steel collar which can be attached to one of many hubs
Snap Wrap Flexible Spider
Design enables for uncomplicated removal of your spider with out moving the hubs
Permits for near shaft separation all of the way as much as the hubs maximum bore
Greatest RPM is one,750 RPM with the retaining ring, but if applied with the LC Kind (with collar) the standard RPM rating with the coupling applies
Style is accessible in NBR and Urethane only, and in limited sizes
Spider Products
SOX (NBR) Rubber
The normal materials that may be very flexible material that is oil resistant
Resembles all-natural rubber in resilience and elasticity, and operates proficiently in temperature ranges of -40° to 212° F (-40° to 100° C)
Has 1.5 times higher torque capability than NBR
Good resistance to oil and chemical substances
Materials delivers significantly less dampening result and operates at a temperature selection of -30° to 160° F
Versatile elastomer built for large torque and substantial temperature operations
Operates in temperatures of -60° to 250° F (-51° to 121° C)
Rigid, porous, oil-impregnated metal insert exclusively for reduced velocity (max 250 RPM) applications requiring substantial torque capabilities
Not impacted by water, oil, filth, or extreme temperatures – operates in temperatures of -40° to 450° F (-40° to 232° C)